background image

Installation

2

Wiring Connections

2

Thermostat Quick Reference

3

Installer Configuration Menu

4

Operating Your Thermostat

6

Programming

6

Troubleshooting

8

www.white-rodgers.com

90 Series Blue Single Stage Thermostat with

90 Series Blue Single Stage Thermostat with

90 Series Blue Single Stage Thermostat with

90 Series Blue Single Stage Thermostat with

90 Series Blue Single Stage Thermostat with

Automatic Heat/Cool Changeover Option

Automatic Heat/Cool Changeover Option

Automatic Heat/Cool Changeover Option

Automatic Heat/Cool Changeover Option

Automatic Heat/Cool Changeover Option

PART NO. 37-6664B

Replaces 37-6664A

0616

Installation and Operating Instructions for Model:

APPLICATIONS

Description

Heat Pump (No Aux. or Emergency Heat)

Yes

Heat Pump (with Aux. or Emergency Heat)

No

Standard Heat & Cooling Systems

Yes

Systems requiring more than One Call for Heat or Cool

No

Standard Heat Only Systems

Yes

Millivolt Heat Only Systems – Floor or Wall Furnaces

Yes

Standard Central Air Conditioning

Yes

Gas or Oil Heat

Yes

Electric Furnace

Yes

Hydronic (Hot Water) Zone Heat – 2 Wires

Yes

Hydronic (Hot Water) Zone Heat – 3 Wires

No

THERMOSTAT APPLICATION GUIDE

1F97-1271 Touchscreen Thermostat

SPECIFICATIONS

Electrical Rating Single Stage:

Battery Power  . . . . . . . . . . . . . . . . . . . . . . . . .

mV to 30 VAC, NEC Class II, 50/60 Hz or DC

Input-Hardwire  . . . . . . . . . . . . . . . . . . . . . . . .

20 to 30 VAC

Terminal Load  . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.0 A per terminal, 1.5A maximum all terminals combined

Setpoint Range  . . . . . . . . . . . . . . . . . . . . . . . . . . .

45 to 99°F (7 to 32°C)

Rated Differential (Single Stage)  . . . . . . . . . . . . . .

Heat 0.6°F; Cool 1.2°F

Operating Ambient  . . . . . . . . . . . . . . . . . . . . . . . . .

32° to +105°F (0 to +41°C)

Operating Humidity  . . . . . . . . . . . . . . . . . . . . . . . .

90% non-condensing max.

Shipping Temperature Range  . . . . . . . . . . . . . . . .

-4 to +150°F (-20 to +65°C)

Dimensions Thermostat  . . . . . . . . . . . . . . . . . . . . .

4.6"H x 5.9"W x 1.2"D

To prevent electrical shock and/or equipment dam-
age, disconnect electric power to system at main fuse
or circuit breaker box until installation is complete.

CAUTION

!

ATTENTION: MERCURY NOTICE

This product does not contain mercury. However, this
product may replace a product that contains mercury.

Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any
spilled mercury and place in a sealed container. For proper
disposal of  a product containing mercury or a sealed
container of  spilled mercury, place it in a suitable shipping
container and send it to:

White-Rodgers
2895 Harrison Street
Batesville AR 72501

Index

Page

Model

Programming Choices

1F97-1271

Non-Programmable 5/1/1 Day

7 Day

Save these instructions for future use!

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING THIS
CONTROL COULD CAUSE PERSONAL INJURY AND/OR
PROPERTY DAMAGE.

Содержание 1F97-1271









Отзывы: