25
7. Press and hold the
time set button
.
Watch the display. When a pro-
grammed “begin setback” time is
displayed, the setback indicator
arrow will turn on. You may check
the programmed “begin setback”
time by releasing the
time set button
when the indicator arrow turns on
(keep in mind that the time displayed
will probably not be the exact time
you programmed, since it may take
you a moment to release the button
after the indicator arrow turns on).
Press and hold the
time set button
again. When a programmed “end
setback” time is displayed, the
setback indicator arrow will turn off.
You may check the programmed
“end setback” time by releasing the
time set button
when the indicator
arrow goes off. You may keep
pressing, holding, and releasing the
time set button
until you have
checked all your programmed
setback time periods.
8. Set the time of day by pressing the
time set button
until the correct time
is displayed (also check the AM/PM
mode).
9. Move the
temperature-set sliding
switch
(see fig. 6) to the temperature
you want maintained when the house
is occupied.
10
21
32
°
C
Figure 6. Temperature-Set
Sliding Switch
•
•
•
•
•
•
•
•
50
60 70 80 90
°
F