18
position, all systems will be off. When
the switch is in the
Heat
position, the
thermostat will cycle only the heating
system. If you have a heating/cooling
system, when the switch is in the
Cool
position, the thermostat will cycle only
the cooling system.
The
setback switch
allows you to
determine how much the temperature
will change during setback periods. The
switch settings (
0
°
F, 5
°
F, 10
°
F, and 15
°
F
)
indicate how much the temperature will
be adjusted during setback periods. You
will find more information about using
the setback switch in
PROGRAMMING
YOUR THERMOSTAT
.
You use the
fan switch
only if you have
a heat/cool system. When the switch is
in the
Auto
position, the fan will cycle
automatically when the heat/cool system
turns on. When the switch is in the
Cont.
position, the fan will run continuously.
The
option switches
allow you to adjust
your thermostat to meet your needs.
You will find more information about the
option switches in
SETTING OPTION
SWITCHES
.
You use the
reset button
if you want to
cancel any thermostat programming.
You also use this button to override
minimum cycle times.