manualshive.com logo in svg

White Outdoor 76G, Руководство оператора, Страница: 19 / 34

Поделиться
Скачать
White Outdoor 76G Скачать руководство пользователя страница 19

Maintenance

8"3/*/(

#FGPSFQFSGPSNJOHBOZNBJOUFOBODFPS

SFQBJSTEJTFOHBHF150NPWFTIJGUMFWFSJOUPOFVUSBM

position, set parking brake, stop engine and remove 
key to prevent unintended starting.

Engine 

3FGFSUPUIF&OHJOF0QFSBUPS0XOFS.BOVBMGPSFOHJOF

maintenance instructions.

Check engine oil level before each use as instructed in the Engine 

0QFSBUPS0XOFS.BOVBMQBDLFEXJUIZPVSVOJU'PMMPXUIF

instructions carefully.

Changing Engine Oil and Filter

'PSESBJOJOHPJMGSPNUIFFOHJOFTDSBOLDBTFPGTFMFDUNPEFM

tractors, a plastic oil drain sleeve or hose is packed with this 

0QFSBUPST.BOVBM4FF'JHVSF

Change the oil as instructed in the separate Engine 

1. 

0QFSBUPS0XOFS.BOVBMQBDLFEXJUIZPVSVOJU

Service the oil filter (if so equipped) as instructed in the 

2. 

TFQBSBUF&OHJOF0QFSBUPS0XOFS.BOVBMQBDLFEXJUIZPVS

unit.

Refill the engine with the proper quantity and weight of 

3. 

OFXNPUPSPJMBTJOTUSVDUFEJOUIF&OHJOF0QFSBUPS0XOFS

Manual packed with your unit.

Air Cleaner

Service the pre-cleaner, if so equipped, and cartridge/air cleaner 

FMFNFOUBTJOTUSVDUFEJOUIF&OHJOF0QFSBUPS0XOFS.BOVBM

packed with your unit.

'JHVSF

Spark Plug

The spark plug should be cleaned and the gap reset once a 
season. Spark plug replacement is recommended at the start 

PGFBDINPXJOHTFBTPO3FGFSUPUIF&OHJOF0QFSBUPS0XOFS

Manual for correct plug type and gap specifications.

Lubrication

8"3/*/(

#FGPSFMVCSJDBUJOHSFQBJSJOHPS

JOTQFDUJOHBMXBZTEJTFOHBHF150NPWFTIJGUMFWFS

into neutral position, set parking brake, stop engine 
and remove key to prevent unintended starting.

Engine

Lubricate the engine with motor oil as instructed in the Engine 

0XOFS.BOVBMQBDLFEXJUIZPVSVOJU

Pivot Points & Linkage

Lubricate all the pivot points on the drive system, parking brake 
and lift linkage at least once a season with light oil.

Rear Wheels

The rear wheels should be removed from the axles once a 
season. Lubricate the axles and the rims well with an all-purpose 
grease before re-installing them.

Front Axles

&BDIFOEPGUIFUSBDUPSTGSPOUQJWPUCBSNBZCFFRVJQQFEXJUIB

grease fitting. Lubricate with a grease gun after every 25 hours of 
tractor operation.

Battery

The battery is sealed and is maintenance-free. Acid levels cannot 
be checked.

Always keep the battery cables and terminals clean and free 

t

of corrosive build-up.

After cleaning the battery and terminals, apply a light coat 

t

of petroleum jelly or grease to both terminals.

Always keep the rubber boot positioned over the positive 

t

terminal to prevent shorting.

*.1035"/5

If removing the battery for any reason, 

EJTDPOOFDUUIF/&("5*7& #MBDLXJSFGSPNJUTUFSNJOBMGJSTU
GPMMPXFECZUIF104*5*7& 3FEXJSF8IFOSFJOTUBMMJOHUIF
CBUUFSZBMXBZTDPOOFDUUIF104*5*7& 3FEXJSFJUTUFSNJOBM
GJSTUGPMMPXFECZUIF/&("5*7& #MBDLXJSF#FDFSUBJOUIBUUIF

wires are connected to the correct terminals; reversing them 

DPVMEDIBOHFUIFQPMBSJUZBOESFTVMUJOEBNBHFUPZPVSFOHJOFT

alternating system.

Cleaning Battery

Clean the battery by removing it from the tractor and washing 
with a baking soda and water solution. If necessary, scrape the 
battery terminals with a wire brush to remove deposits. Coat 
terminals and exposed wiring with grease or petroleum jelly to 
prevent corrosion.

Maintenance & Adjustments

6

Содержание 76G



































Отзывы:

Нет отзывов