manualshive.com logo in svg

White Outdoor 76G, Руководство оператора, Страница: 14 / 34

Поделиться
Скачать
White Outdoor 76G Скачать руководство пользователя страница 14

To stop the engine, turn the ignition key counterclockwise to the 

0''QPTJUJPO4FF'JH#

Ignition Switch Module

To start the engine, insert the key into the ignition switch and 
turn clockwise to the START position. Release the key into the 

/03."-.08*/(.0%&QPTJUJPOPODFUIFFOHJOFIBTGJSFE5IF

headlights will be activated in the Normal (and Reverse Caution 
Modes).

To stop the engine, turn the ignition key counterclockwise to the 

0''QPTJUJPO4FF'JH$

8"3/*/(

Never leave a running machine 

VOBUUFOEFE"MXBZTEJTFOHBHF150NPWFTIJGUMFWFS

into neutral position, set parking brake, stop engine 
and remove key to prevent unintended starting.

*.1035"/5

1SJPSUPPQFSBUJOHUIFUSBDUPSSFGFSUPCPUI4BGFUZ

*OUFSMPDL4XJUDIFTBOE4UBSUJOH5IF&OHJOFJOUIF0QFSBUJPO

section of this manual for detailed instructions regarding the 
Ignition Switch Module and operating the tractor in REVERSE 

$"65*0/.0%&

Clutch-Brake Pedal

The clutch-brake pedal is located on the left side of the lawn 
tractor, along the running board. Depress the clutch-brake pedal 
part way down when slowing the tractor by changing speeds 

(Refer to Speed Control Lever)

. Depress the pedal all the way down 

to engage the disc brake and bring the tractor to a complete 
stop.

NOTE: 

The pedal must be depressed to start the engine. Refer to 

4BGFUZ*OUFSMPDL4XJUDIFTJOUIF0QFSBUJPOTFDUJPOPGUIJTNBOVBM

Parking Brake

To set the parking brake, fully depress the clutch-brake pedal. 
Move the speed control lever all the way down and into the 
parking brake position. Release the clutch-brake pedal to allow 
the parking brake to engage.

To release the parking brake, depress the clutch-brake pedal and 
move the speed control lever out of the notches to the desired 
position. Release the speed control lever and the clutch-brake 
pedal.

NOTE: 

The parking brake must be set if the operator leaves the 

seat with the engine running or the engine will automatically 
shut off.

Shift Lever 

The shift lever is located on the left side of the fender and has 

UISFFQPTJUJPOT'038"3%/&653"-BOE3&7&34&5IFCSBLF

pedal must be depressed and the tractor 

NVTUOPUCFJONPUJPO

XIFOUIFNPWJOHTIJGUMFWFS4FF'JH

*.1035"/5

Never force the shift lever. Doing so may result in 

TFSJPVTEBNBHFUPUIFUSBDUPSTUSBOTNJTTJPO

Speed Control Lever

The speed control lever, located on the left side of 

UIFUSBDUPSTEBTIDPOTPMFBMMPXTZPVUPSFHVMBUF

the ground speed of the lawn tractor. To use, 
depress the clutch-brake pedal and move the lever 
out of the parking brake notch and forward to 

JODSFBTFUIFUSBDUPSTHSPVOETQFFE8IFOBEFTJSFE

speed has been reached, release the lever into an 
appropriate notch to maintain that speed. 

5PTMPXUIFUSBDUPSTHSPVOETQFFEEFQSFTTUIF

clutch-brake pedal and move the speed control 
lever rearward and release it into a notch. 

NOTE: 

Lawn tractors vary by model and are 

BWBJMBCMFXJUIFJUIFSBPSTQFFEDPOUSPMMFWFS

PTO (Blade Engage) Lever

'PVOEPOUIFUSBDUPSTSJHIUGFOEFSUIF150

(blade 

engage) 

lever is used to engage power to the cutting 

deck or other 

(separately available) 

attachments. 

To operate, move the lever all the way forward. 

.PWJOHUIFMFWFSBMMUIFXBZSFBSXBSEJOUPUIF150
0''QPTJUJPOEJTFOHBHFTQPXFSUPUIFDVUUJOHEFDL

attachment. 

NOTE: 

5IF150

(blade engage) 

lever must be in the 

EJTFOHBHFE 1500''QPTJUJPOXIFOTUBSUJOHUIF

engine.

Deck Lift Lever 

'PVOEPOZPVSUSBDUPSTSJHIUGFOEFSUIFEFDLMJGUMFWFS

is used to change the height of the cutting deck. To 
use, move the lever to the left, then place in the notch 
best suited for your application.

'JHVSF

S

ECTION

 4 — C

ONTROLS

 

AND

 F

EATURES

Содержание 76G



































Отзывы:

Нет отзывов