30411-12-1115
Page 18
Before you begin: Do not, handle these logs with your bare hands!
Always wear gloves to prevent skin irritation. After handling logs,
wash your hands gently with soap and water.
All Logs
The positioning of the logs is critical to the safe and clean operation
of this heater. Sooting and other problems may result if the logs are
not properly and firmly positioned in the appliance.
The following Warning applies when log set is installed onto an
unvented gas burner assembly.
Note: Replacement Glowing Embers must be purchased from an
authorized distributor.
Attention: When ordering parts, it is very important that part num-
ber and description of part coincide.
USE ONLY MANUFACTURER'S REPLACEMENT PARTS. USE
OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH.
LOG PLACEMENT
Glowing Ember Placement
WARNING
All previously applied Glowing Embers must be removed
prior to reapplication.
Applying Glowing Embers as shown in the image below.
Note:
Application of excess Glowing Embers may adversely af-
fect performance of the fireplace.
WARNING
Failure to position the parts in accordance with this diagram
or failure to use only parts specifically approved with this
appliance may result in property damage or personal injury.
2
1
3
WARNING
This appliance is equipped for natural or propane gas. Field
conversion is not permitted.
INDEX
NUMBER
PART
NUMBER
DESCRIPTION
1
R-7506
LOG A
2
R-7504
LOG B
3
R-7505
LOG C
Содержание VFP24FP2(0,1,2,3)L(N,P)-1
Страница 19: ...30411 12 1115 Page 19 1 Place Log A between rear log support and burner pan See image below LOG PLACEMENT ...
Страница 20: ...30411 12 1115 Page 20 2 Place Log B onto the two left front pins on the burner pan LOG PLACEMENT ...
Страница 21: ...30411 12 1115 Page 21 3 Place Log C onto the two right front pins on burner pan See image below LOG PLACEMENT ...
Страница 22: ...30411 12 1115 Page 22 4 Log set assembly is complete LOG PLACEMENT ...
