FAILURE
CODE
FAILURE
INDICATOR
PROBABLE
FAILURE
THE PROCESS
TO BE DONE
Err 02
The program ready
light blinks.
The water level in
your machine is
below the heater.
The pressure of
your water supply
may be low.
Turn the tap fully
on. Water may be
cut, check it. If the
problem is still
continuing, your
machine will
automatically stop
after a while.
Unplug your
machine, turn off
the tap and contact
the authorised
service agent.
Err 03
The start/pause
light and program
ready light blinks.
The pump has
failed or the pump
filter is obstructed.
Clean the pump
filter. If the problem
persists, contact
the authorised
service agent. (*)
Err 04
The program end
light blinks .
There is an
excessive amount
of water in your
machine.
Your machine will
automatically drain
the water. After
your machine has
completed the
draining process,
shut down your
machine and
unplug. Close the
tap and contact the
authorised service
agent.
(*) See the section regarding the maintenance and cleaning of your machine.
25
