THE CABINET
Clean the exterior surface of the cabinet of your machine with lukewarm water and a
cleaning substance that will not damage the cabinet. After rinsing with clean water, wipe it
with a soft and dry cloth.
WARNING!
If the machine is installed in a location where the ambient temperature can fall below 0 C,
ensure the following procedure is used when it is not in use:
Plug in the machine.
Close the water tap and remove the water inlet hose from the tap.
Place the ends of the water drain and water inlet hose in a cup on the ground.
Turn the program knob to “Drain” program.
The program ready light will come on.
Run the program by pressing the start/pause button.
Unplug your machine when the program is over (program end light is on).
When you complete this process, the remaining water inside the machine will be drained
and thus formation of ice in the machine will be prevented. When you operate your
machine again, be sure that the ambient temperature is above 0 C.
THE DRUM
Do not leave metal parts like needles, staples or coins inside your machine. These pieces
cause rust stains in the drum. To eliminate these stains, use a suitable cleaning
substance and follow the recommendations of the cleaning substance producer. For
cleaning rust stains, never use scouring pads or similar rough objects.
LIMESCALE REMOVAL
If you use the correct amount of detergent, there will be no need for limescale removal.
However, if you wish to remove limescale, use the limescale protectors available in the
market and pay attention to their warnings.
WARNING!
The limescale eliminating substances contain acids and this may cause colour
modifications in your clothes along with an adverse effect on your machine.
18
