14
D E TA C H A B L E B R E A D R O L L R A C K
D E TA C H A B L E B R E A D R O L L R A C K
1. Place the rack on the top of slot properly by holding the
handles and ensure the rack is tightly set.
2. Put the roll on the metal grids and switch on the toaster.
CAUTION :
Never touch the metal grids when they are hot.
The bread rolls should not protude beyond the
sides of the rack by more than 1 cm.
C L E A N I N G T H E C R U M B T R AY
C L E A N I N G T H E C R U M B T R AY
1.
Unplug the toaster from the electrical outlet and allow to
cool thoroughly
2.
Gently grip the Removable Crumb tray and slide out from
the toaster.
3.
Dispose of the crumbs, wipe out the remaining crumb
from the removable Crumb Tray back into the toaster.
4.
Gently slide the Removable Crumb tray back into its place.
Note :
Never operate the toaster without the removable
Crumb Tray in place. Do not cover the removable Crumb
Tray or any other part of the toaster with foil.
To avoid damage to the toaster heating elements, never use
any pointed or sharp utensils for cleaning the inside of the
toaster. Empty the Removable Crumb Tray periodically.
M A I N T E N A N C E
M A I N T E N A N C E
1.
Unplug toaster from electrical outlet. Make sure that
toaster is completely cooled before cleaning.
2.
Removable Crumb Tray should be cleaned every 4-5 use
(see cleaning the Crumb Tray).
3.
Do not use harsh or abrasive cleaning agents. Outside
surface may wiped clean with a soft, damp cloth and
dried thoroughly. If necessary, a mild dish washing
detergent may be applied to the cloth but not directly to
the toaster.
4.
Do not immerse it in water or any other liquid.
5.
Do not allow plastic wrappings to lay against the toaster.
Notice TA 695:Notice TA 695 1/10/07 12:11 Page 14
