White and Brown IP 427 Tania, Руководство пользователя

Страница: 14 / 16

14
3.- USER RECOGNITION
If the scale has been programmed for the user, it will automatically recognize and show the correct user number after 10
seconds.
- Press on scale with your foot, all data are displayed.
- Wait until 0.0 kg displays before standing on scale.
- Stand on scale with bare feet. A dotted line flashes and then your weight and user values are displayed and body
analysis starts.
- Scale turns off automatically after 10 seconds.
- If two users have similar weight and body impedance, the two user numbers show alternatively 3 times.
- The user should choose a user number by pressing SET touch.
- Body analysis starts.
- If a user number is not confirmed, the scale turns off automatically.
4.- DISPLAY MESSAGES
Lo Batteries are low and must be replaced.
Err The scale is overload.
Err0 or Err1 A mistake during fat measurement or poor contact with sensors.
Err3 Operational mistake. Restart the scale according to the manual instructions.