16
To turn a channel-storage bank on or off, press the
bank’s number key (
1–0,
using
0
for bank 10) during
scanning. The channel-storage banks are on when
they have a bar underneath them and off when no
bar appears underneath them.
• You cannot turn off all banks; there must be at
least one active bank.
• You can manually select any channel in a bank,
even if the bank is turned off.
Setting Delay
To avoid missing a reply in conversations, a
two-second delay is automatically set for each
channel. The scanner stops for two seconds after
a transmission ends before it resumes scanning or
searching.
DLY
appears on the display when the delay
function is active.
To turn delay on:
• If the scanner is scanning and stops on an active
channel, quickly press
•/DELAY
before it resumes.
• If the desired channel is not selected, manually
select the channel, then press
•/DELAY
.
• If the scanner is searching, press
•/DELAY
.
DLY
appears and the scanner adds a two-second delay
to every transmission it stops on in that bank.
To turn delay off:
Press
•/DELAY
while the scanner is monitoring a
channel or frequency.
DLY
disappears.
Using the Priority Channel
The priority feature sets the scanner to check one
specific channel every two seconds while scanning.
You can only program one frequency into the priority
channel.
1.
Press
PGM,
then press
PRI/ALERT.
PCH
and
000.000
0
(or the previously stored frequency)
appear.
2.
Enter the frequency you want stored in the priority
channel, then press
ENT
.
PRIORITY CHANNEL
