Whistler WS1025, Руководство пользователя

Страница: 12 / 34

12
Configuring Your Scanner
Preprogrammed Frequencies
Your scanner includes 153 preprogrammed
frequencies, which you can load into Channels
1 to 153. For a list of these frequencies, see
“Preprogrammed Frequency List” on page 23.
To load the pregprogrammed frequencies:
1. Turn off the scanner and then turn it on again.
2. While
WELCOME
message appears, press PGM.
3.
Load
–
Fr
– appears, then
YES
––
Ent
and
No
––
CLEAr
appear alternately.
4. Press ENT to load frequencies or CLEAR to
cancel.
Programming Channels
If you do not have a list of frequencies in your area,
refer to www.radioreference.com.
1. Press PGM .
PGM
appears.
2. Enter the channel number (1–200) where you
want to store a frequency, then press PGM again.
3. Use the number keys and • to enter the frequency
(including the decimal point), then press ENT .
4. To program the next channel in sequence, press
PGM and repeat Step 3. To program a specific
channel repeat Steps 2 and 3..
• Your scanner automatically rounds down to
the closest valid frequency. For example, if
you enter 151.473, your scanner rounds it to
151.470.
• If
Error
appears and the scanner beeps three
times when you press ENT , start again from
Step 2.
• If the frequency is already stored in another
channel, the scanner beeps three times and
displays
-dUPL-
(duplicate) and the lowest
channel number where the frequency is already
stored. Press
TUNE/CLEAR
to cancel. Press
ENT
if you still want to store the frequency.
CONFIGURING SCANNER