29
TROUBLESHOOTING - FCC INFO
PROBLEM:
Display shows an error code. Codes are listed in the
installation guide.
• Warning communicates a problem at the Interface Box
• Check connections in the Interface Box
• Perform “reset features”
• See dealer/installer
If a T error occurs:
• Press PWR to turn off unit
• Check connections in the Interface Box
• See dealer/installer
NOTE:
This T error occurs only at Power Up.
If difficulties occur which cannot be solved by information in this
Troubleshooting Guide, please call Whistler Customer Service at
1-800-531-0004 or visit our FAQ page at
www.whistlergroup.com
, before returning your unit for service.
FCC INFORMATION
FCC ID: HSXWH28
This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1) This device many not cause harmful interference, (2) this
device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT:
FCC requirements state that changes or
modifications not expressly approved by Whistler could void
the user’s authority to operate the equipment.
