OPERATION SUMMARY
22
In Review.
• Never attempt to operate your Whistler inverter from any
power source other than a 12 volt battery or a group of
batteries that total 12 volts.
• Always make certain that the power cable terminal
connections Negative (-) to Negative (-) and Positive (+) to
Positive (+). Check these connections frequently to ensure
that they are secure.
• Make certain the rated power consumption of the appliance
or equipment you wish to operate is compatible with the
capacity of your inverter.
• If the rated power consumption of the equipment is in the
range of the maximum specified wattage of your converter,
test the inverter to ensure that it will operate properly.
• Before attempting to use a battery charger see page 15.
• Before attempting to use medical equipment see page 6.
• Use the proper gauge cable (smaller the number, the
larger the cable) available to connect the inverter to the
power source.
• When operating the inverter with the engine off, start
the engine every 30 minutes and let it run for at least 10
minutes to recharge the battery.
