WhisperKool PLATINUM MINI Скачать руководство пользователя страница 49

WhisperKOOL Product Terms and Conditions  

Including Product Limited Warranty And Product Installation Requirements 

For WhisperKOOL Split System Series

ATTENTION:  PLEASE  READ  THESE  TERMS  OF  USE  CAREFULLY  BEFORE  INSTALLING  YOUR  WHISPERKOOL  COOLING 

SYSTEM. INSTALLING YOUR WHISPERKOOL COOLING SYSTEM INDICATES THAT YOU ACCEPT AND AGREE TO EACH OF 

THE TERMS AND CONDITIONS SET FORTH HEREIN (“TERMS OF USE”). IF YOU DO NOT ACCEPT THESE TERMS OF USE, YOU 

RISK VOIDING YOUR WARRANTY AND ASSUMING ADDITIONAL REPAIR AND REPLACEMENT COSTS.

1. Purchase of a WhisperKOOL Cooling System assumes that the Purchaser (“End User”) fully accepts and

agrees to the Terms and Conditions set forth in this document. The Terms and Conditions of Sale and

Owner’s Manual are shipped with each unit and, if another copy is needed, replacement copies can be 

downloaded from the company website (whisperkool.com) or by contacting WhisperKOOL directly for a 

new copy. WhisperKOOL reserves the right, in its sole discretion, to change its Terms and Conditions at any 

time, for any reason, without notice.

2. WhisperKOOL Product Installation and Limited Warranty

A. Purchaser of the product must arrange for the product to be installed by a certified HVAC/R technician in accordance with

procedures set forth by WhisperKOOL and described in the WhisperKOOL Owner’s Manual.

B. The HVAC/R technician installing the product must complete the designated portion of the Split Startup Checklist and

provide licensing or certification identification number information to assist in the warranty registration process.

C. Purchaser  must  return  the  completed  Split  Startup  Checklist  to WhisperKOOL  within  thirty  (30)  days  of  installation  of

Product. The  Split  Startup  Checklist  must  be  approved  by WhisperKOOL  to  activate  the  Limited Warranty.  If  the  Split

Startup Checklist is approved, Purchaser will be sent activation approval documents and will start receiving the benefits

of the Limited Warranty throughout the warranty period. If the Split Startup Checklist is incomplete, Purchaser will be

informed they have five days to complete the Split Startup Checklist and re-submit to WhisperKOOL. The Split Startup

Checklist will be reviewed again, and if denied, Purchaser will be informed that they have 10 business days for corrective

action. Failure to register the Product may result in loss of warranty.

D. Purchaser is responsible for the full costs of installation and any additional parts required for the proper and complete

installation of the product.

E. For  Split  Systems  returned  to  WhisperKOOL  in  accordance  with  the  terms  and  conditions  of  the  Limited  Warranty,

WhisperKOOL warrants against defects in material and workmanship as follows:

1.

LABOR

 — For a period of two (2) years commencing on the date of purchase, WhisperKOOL will, at its option and

discretion,  reimburse  up  to  $250  to  the  End  User  for  cost  incurred  for  servicing,  repairing,  removing  or  installing

warranty parts. Invoice for service must be forwarded to WhisperKOOL for assessment and  

processing.  The

Split System warranty is invalid if there is attempted repair by anyone other than an HVAC/R technician approved by

WhisperKOOL to service the Product.

2.

PARTS

 — For a period of two (2) years commencing on the date of purchase, WhisperKOOL will supply, at no charge,

new  or  rebuilt  replacement  parts  in  exchange  for  defective  parts.  Replacement  parts  are  warranted  only  for  the

remainder of the original warranty period.

3.

FREIGHT

  —  For  a  period  of  two  (2)  years  commencing  on  the  date  of  purchase,  if  after WhisperKOOL  approved

evaluation the original Product failure is determined to be the cause of a manufacturers defect, and not the cause of

an installation error or other cause, WhisperKOOL will cover at its option, freight for the replacement parts or Product.

The following part or cause of failure is not the responsibility of WhisperKOOL: 

• Improper voltage supply
• Line set with screw connectors (high end and low end)
• Leaks found at the braze points when performing pressure check
• Unit that has been charged incorrectly

PRODUCT

Split

 Cassette

 System Series 

WARRANTY INFORMATION

The Coolest Thing In Wine Storage

Page 47

Содержание PLATINUM MINI























































Отзывы: