Page 2 | 1-800-343-9463
QS
020519
WARNING
Failure to follow the instructions provided
in this manual may
result in a poor
vapor barrier, water damage, rust, and
/or
system corrosion
and
will void the warranty
on your unit.
The evaporator unit (fan coil unit) must be insulated using fiberglass insulation (R1
9
or
higher). This includes the cavity between the ceiling joists
(if the unit is installed in an attic)
.
A warm environment will reduce the capacity of the cooling system, as the system will absorb
heat from the
environment
in addition to the heat load from the wine cellar. This, in effect,
will significantly reduce the cooling system’s ability to cool the wine cellar.
Failure to properly insulate the evaporator unit may cause condensation to form on the
surface of the housing and water damage to the surrounding
space
, the cooling unit, and
possibly the wine cellar.
To avoid these issues, insulate
any
surface of the evaporator unit located outside of the wine
cellar using fiberglass insulation
with a rating of R19 or higher.
Additional insulation is
REQUIRED.
