WHISPBAR RAIL BAR
EN
S45W
Fitment
●
Position one end of crossbar on the
opposite roof rail and swing the free end so
that the clamp is under the rail and the
rubber gasket sits on top.
●
Repeat on other crossbar.
●
Crossbars should be parallel to each other
and sit perpendicular to the roof rails.
●
Pull legs out evenly until both rubber
gasket seal on roof rail.
●
Ensure each end of the crossbar is
adjusted equally.
●
Note that legs can pivot slightly to
accommodate for roof rail taper.
●
Once crossbars are in position, tighten
screw to 5 Nm (3.7 ft lb).
●
Repeat for all legs.
4
