Fitting Kit
EN
K408W
Fitment
●
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●
Please check the rear of this manual for
information relating specifically to your
vehicle.
●
Locate vehicle's fixed points.
●
Clamps directly to edge of roof under the
doors, pin locates in hole on vehicle
●
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●
Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
8
