manualshive.com logo in svg

whisker Litter-Robot 4, Инструкция по эксплуатации

Поделиться
Скачать
whisker Litter-Robot 4 Скачать руководство пользователя страница 30

www.whiskersupport.com

30

Carbon

Filter

Seal

Strips

Carbon Filter

The Litter-Robot is equipped with a flexible Carbon Filter pad 
that is installed on the outer bottom area of the Globe. This 
filter sits directly over the Waste Drawer to absorb odors. The 
Carbon Filter is easily removed and installed  
by starting a Clean Cycle, then opening the Bonnet  
when the Globe is at the Dump Position. Replace  
the Carbon Filter as needed. Under normal use,  
one filter should last approximately 1 month. The  
Carbon Filter is not required for the unit to function.

Replacement Carbon Filters and other odor-absorbing 
accessories can be ordered at litter-robot.com.

Base Seal Strips

The Litter-Robot is equipped with brush-type Seal Strips 
on both the top and bottom of the Base.  
These Seal Strips help contain odors within the  
Waste Drawer.

Replace the Seal Strips when you notice they are 
worn flat or peeling up. Make Seal Strips last longer by 
trimming loose edges between replacements. Be careful 
not to get them wet when cleaning the Base or they may 
begin to peel. Replacement Seal Strips can be ordered at 
litter-robot.com.

Emptying the Litter-Robot

1. 

Press the Empty button to cycle the Globe clockwise, which will allow 
the litter to fall through the Waste Port and into the Waste Drawer for easy 
disposal.

2. 

If litter remains in the Globe, sweep the granules toward the Waste Port.

3. 

Press any button to return the Globe to the Home position.

IMPORTANT:

 Supervise and prevent your cat from entering during the Empty cycle, 

as the unit may not detect your cat without litter in it.

Содержание Litter-Robot 4









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды