6
Freezer Leveling and Door Closing
Style 1—without Grille
1.
Locate the 2 front leveling legs taped among the packing materials.
2.
Screw these legs into the front holes on the bottom of the freezer.
The back of the freezer rests on 2 fixed supports.
3.
Adjust the front legs enough to lift the cabinet up off the floor.
4.
Place a leveling tool on top of the freezer first side to side, then
front to back. Turn leg counterclockwise to raise a corner. Turn leg
clockwise to lower a corner.
5.
Repeat Step 4 until freezer is level.
6.
After freezer is fully loaded with food, recheck with level as in
Step 4.
Style 2—with Grille
Your freezer has 2 front adjustable legs, one on each side. The back of
the freezer rests on 2 fixed rollers. The base grille covers the adjustable
brake feet and roller assemblies located at the bottom of the freezer
below the freezer door. Before making any adjustments, remove the
base grille and move the freezer to its final location.
Tools Needed:
¹⁄₄
" hex driver, Phillips head screwdriver
1.
Remove the base grille screws. Grasp the grille firmly and pull it
toward you. Open the freezer door to access the brake feet.
A. Cabinet Hinge Hole Plugs
A
Door Swing Reversal and Handle Removal (optional)
2
A. Grommet
B. Handle
C. Setscrews
A
B
C
1
3
Door Removal &
Replacement
Top Hinge
A. Top Hinge Cover
B.
5
/
16
"
Hex-Head Hinge Screws
C. Top Hinge
A
B
B
C
Bottom Hinge
A. Hinge Pin
B.
3
/
8
"
Hex-Head Hinge Screws
A
B
A. Hinge Pin
B.
3
/
8
"
Hex-Head Hinge Screws
A
B
