background image

9

Storage Basket (on some models)

The slide-out basket provides 
separate storage space for items 
that are difficult to store on freezer 
shelves. To remove the basket, pull 
out and lift up.

Storage Gate (on some models)
To Remove the Storage Gate:

1.

  Lift up the top of the gate and out of the supports.

2.

  Return the gate to original position. Lower the gate 

into the supports.

Freezer Shelves

Store similar foods together and adjust the shelves to fit  
different heights. This reduces the time the freezer door  
is open and saves energy.

To Remove and 

Replace a Shelf:

1.

  Remove the shelf by 

lifting straight up and 
pulling the shelf out.

2.  

Replace the shelf by 
lowering the shelf onto 
the supports on the 
side wall.

Cleaning Your Frost-Free Freezer

Frost-free means that you will not have to defrost your freezer. 
Frost is removed by air moving and collecting any moisture and 
depositing it on the cooling coil. The cooling coil periodically 
warms up enough to melt the frost, and it then flows down to the 
drain pan (located behind the base grille) where it is evaporated.
Complete cleaning should be done at least once a year.

1.  Press and hold TEMP SETTING for 3 seconds to turn off 

cooling.

2. 

Unplug freezer or disconnect power.

3. 

Remove all frozen food. Wrap frozen food in several layers 

of newspaper and cover with a blanket. Food will stay frozen 

for several hours. You may also store frozen food in a cooler, 

additional refrigerator-freezer, or in a cool area.

4. 

 Remove all removable parts from inside, such as shelves, 

bins, etc.

5. 

Hand wash, rinse, and dry removable parts and interior 

surfaces thoroughly. Use a clean sponge or soft cloth and 

a mild detergent in warm water.

 

Do not use abrasive or harsh cleaners such as window 

sprays, scouring cleansers, flammable fluids, cleaning 

waxes, concentrated detergents, bleaches or cleansers 

containing petroleum products on plastic parts, interior 

and door liners, or gaskets. Do not use paper towels, 

scouring pads, or other harsh cleaning tools. These can 

scratch or damage materials.

 

To help remove odors, you can wash interior walls with 

a mixture of warm water and baking soda (2 tbs to 1 qt 

[26 g to 0.95 L] of water).

6. 

Replace the removable parts.

CARING FOR YOUR FREEZER

WARNING

Explosion Hazard

Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

7. 

Use the appropriate cleaning method for your exterior finish.

Painted metal:

 Wash exteriors with a clean sponge or soft 

cloth and a mild detergent in warm water. Do not use abrasive 

or harsh cleaners or cleaners designed for stainless steel. Dry 

thoroughly with a soft cloth.

8. 

Clean the condenser coils regularly. Coils may need to be 

cleaned as often as every other month. This may help save 

energy.

 

Open the freezer door and remove the base grille by 

removing 2 Phillips-head screws and pulling the grille 

toward you.

 

Use a vacuum with an extended attachment to clean the 

condenser coils when they are dusty or dirty.

 

Replace the base grille by aligning the ends of the grille 

with the leveling assemblies on each side and snapping 

the grille into place. Reinstall the screws.

9. 

Replace all frozen food.

10. 

Plug in freezer or reconnect power.

11. 

Set temperature control to desired setting. See “Using the 

Control.”

Содержание WZF34X20DW01














Отзывы: