Whirlpool WVMD1208AHG Скачать руководство пользователя страница 8

t h

The 6  Sense Smart Program

When washing the laundry, you can freely choose the end time of the Washing Program 
via the Smart Program.

Operation Steps

1. Preparation: Lay down the Drain Hose. Turn on the Faucet. Plug the Power Cord Plug into 
   the power socket. Add the laundry.
2. Close the washer lid.
3. Press the Power Button.
4. Choose the Smart Program.
• The Smart Program is the default Program. You can go directly to the next step.
• If you ran the Cotton or Mix Wash Program last time, due to the Smart Memory Function of 

t h

t h

 the Program, you need to press the 6  Sense Smart Slider to switch to the 6  Sense Smart 
 Program.
5. Choose the Program end time you need.
• You can adjust the desired wash completion time (adjustable from 15 minutes - 1 hours 30 
 minutes; depending on the laundry weight and water pressure, the actual washing time will 

t h

 be different) by sliding the 6  Sense Smart Slider.
6. Press the Start/Pause Button to start the Washing Program.

Warm Wash Program 

The Warm Wash Program heats the water up to 40°C, helping to remove various stubborn 
stains and aids in effective allergen removal.

Operation Steps

1. Preparation: Lay down the Drain Hose. Turn on the Faucet. Plug the Power Cord Plug into 
the power socket. Add the laundry.
2. Close the washer lid.
3. Press the Power Button.
4. Press the Warm Wash Button to select the Warm Wash Program.
6. Press the Start/Pause Button to start the Washing Program.

Caution

• Applicable to cotton and linen clothes of less than 3.0kg. (Corresponding to two water 
 levels)
• When the laundry amount exceeds 3.0kg, please select the appropriate level. The wash 
 effect of the Hot Wash Program will be influenced.
• This Program is influenced by the ambient temperature. When the ambient temperature is 
  too low, the heating effect of this Program will be influenced.
• The water temperature is high. Please do not wash dark and other clothes that are 
  inclined to fade. Do not use this Program to wash clothes that require a wash water 
  temperature below 40°C.
• You can just dry them after the Program ends. The normal operation of the machine will 
  not be influenced.

To improve the washing effect, you can increase the detergent amount appropriately.

Home Textiles Program Instruction

The Home Textiles Program applies to washing blankets and other large items
• When this Program is used, the water level is automatically set to Level 10. However, you 
  can change the water level to Levels 6 ~ 10 according to the size of the household textiles.

Operation Steps

1. Close the Washer Lid.
2. Pour the liquid detergent into the corresponding Detergent Box. If you are using powder 
  detergent, it is recommended to dissolve it thoroughly in 5L of warm water (about 30°C) 
  and then slowly pour the solution into the Washing Machine.
3. Place the rolled side of the household textile down in the Washing Machine.
4. Select the Home Textiles Function.
• Press the Power Button and then press the Home Textiles Button in the Program Selection
 Area. The Home Textiles Indicator will blink. Press the Start/Pause Button to start running 
 the Program. (If necessary, you can adjust the water level manually.)
• After the wash ends, the beeper will beep. Then by default, the Draining Function will start 
 immediately and the power will be cut off automatically.
• After the wash ends, turn off the Faucet and clean the 

Lint Filter Pouch

.

How to Fold a Blanket and Put it in the Washing Machine

Fold the blanket in half

Then fold it in the same 
direction into 4 layers

Roll up the blanket

Place the rolled side of the 
blanket down in the Washing 
Machine.

After the wash ends

Take out the blanket and hang it from the middle in the shade.
Note: • Pre-wash the dirty parts by hand.
• Do not use too much detergent.
• Stains can be removed effectively with warm water (about 30°C).
• During the washing process, if a part of the blanket is exposed 
 above the water surface, press the Start/Pause Button. 
 The Washing Machine will temporarily stop running. Press the exposed part into the water 
 and press the Start/Pause Button again to resume the wash.

Dry

Содержание WVMD1208AHG












Отзывы: