Installation Instructions
Installation of the Universal Joint
1. Hold the Universal Joint
in one hand and the
Locking Rod in the other
hand and then detach the
Universal Joint from the
Water Inlet Hose.
2. Evenly adjust the four
screws on the Universal
Joint so that the two
screws near the wall fully
contact the outside of the
Faucet first.
3. Insert the Universal
Joint vertically onto the
Faucet with its internal
seal tightly attaching to
the opening of the
Faucet and tighten the 4
screws with a
screwdriver.
4. Remove the seal from
the Universal Joint and
tighten the Universal
Joint.
Jniversal Joint
Locking Rod
Water Inlet Hose
Wall
Small
Large
Faucet
Connection of the Water Inlet Hose
1. Connect the
Water Inlet Hose
to the Universal
Joint.
2. Align the Water Inlet
Hose with the opening of
the Water Inlet Valve, and
turn the fastening screw
nut clockwise on the
Water Inlet Hose until it
cannot be turned any
more.
3. Check whether the Water Inlet Hose is Connected
Firmly
• Pull the Water Inlet Hose downwards to check whether
the Water
Inlet Hose is firmly connected to the Universal Joint.
Then slowly
turn on the Faucet to see if water leakage
occurs. If water leakage occurs, turn off the
Faucet and reinstall.
• After long-term use, the Universal Joint
may become loose. Reinstall it.
• Turn off the Faucet when the laundry
Program ends or the Machine will not be used
for a long time.
Locking
Rod
Sleeve
Protruding
Connection
Section
Tighten
the Nut
Water Inlet Valve
Removal of the Water Inlet Hose
1. Turn off the Faucet.
2. Press the Power Button to turn on the power. Then press
the Start/Pause Button.
3. Turn off the power after 15 seconds.
4. Pull down the Locking Rod and Sleeve with your fingers
and remove the Water Inlet Hose.
Turn the Water Inlet Hose on the Inlet Valve
anticlockwise until the Water Inlet Hose is
removed.
Connection of the Drain Hose
Connect the Drain Hose to the Drain Mouth and then fix it
with a hose clamp as shown in the figure on the right:
Note: Be sure to use the new Water Inlet Hose included in the accessories instead
of an old Water Inlet Hose.
Universal Joint
Locking Rod
Sleeve
Drain Mouth
Hose Clamp
Installation Instructions
Changing of the Position of the Drain Hose
Depending on the use location, the Drain Hose can be changed from being on the right side to being on
the left side.
• During the changing, unplug the Power Cord.
• To prevent hand scratches or injuries , please wear gloves.
1. Remove the cap on the Drain Mouth on the left.
2. Lay the Washing Machine backward down on a soft cushion.
3. Loosen the Hose Clamp and unplug the Inner Drain Pipe from
the Drain Valve.
4. Push the joint on the Drain Mouth and pull the Inner Drain
Pipe out of the Drain Mouth on the right side of the Washing
Machine.
5. Insert the Inner Drain Pipe from the Drain Mouth on the left
side and snap the joint.
6. Connect the Inner Drain Pipe to the Drain Valve and fix it with
the Hose Clamp.
7. Install the Drain Mouth Cap on the left in the appropriate
position on the right.
8.Lift the Washing Machine gently until it is placed steadily.
(Front View)
Drain Valve
Hose Clamp
Inner
Drain Pipe
Drain Mouth
Cap
Drain
Mouth
Drain
Valve
Hose Clamp
Inner Drain
Pipe
Drain Mouth
Extension of the Drain Hose
If the drain hose length is not sufficient, please purchase more Drain Hoses
from the seller or the company and then connect the Drain Hoses to each other.
Extension of the
Drain Hose
Extension Height
There is a step in the
middle
There are no steps
in the middle
Extension
Length
within 15cm
within 1cm
within 3cm
within 1cm
within
15cm
Washing Tips
• Please wash colored and white,
thick and thin laundry separately.
Please wash laundry according
to the clothing care tags.
Legend
• Please wipe dirt and sand off the
laundry first.
• Make sure there are no items in
the clothing pockets. (such as
nails, coins, etc. that may damage
clothes, create
abnormal sounds or
cause a malfunction
of the washing
machine.)
• Please put clothes that can easily
float, or large, heavy clothes in
first. If any clothes come to the
surface, please temporarily stop
washing and press the clothes
down into the water. (A pressing
plate needs to be placed on the
clothes)
• Tighten loose straps on the
clothes, ensure zippers and
buttons are done up.
• When washing fine fabrics such
as lingerie, lace-trimmed items,
nylon and thin chemical fiber
fabrics, etc., they should be
placed in a mesh
washing bag.
• For the clothes that lose their
wool or thread easily, please
turn them inside out during
washing.
Содержание WVMD1208AHG
Страница 7: ......
