15
ACCESSORIES
The following accessories are available for your refrigerator. To
order, contact us and ask for the Part Number.
In the U.S.A., visit our webpage www.whirlpool.com/
accessories or call 1-800-901-2042.
Automatic Ice Maker (optional):
Order Part #24ECKMF
affresh
®
Kitchen & Appliance Cleaner:
Order Part #W10355010
Temperature is
too warm
■
New Installation - Allow 24 hours following installation for the refrigerator to cool completely.
■
Door(s) opened often or not closed completely - Allows warm air to enter refrigerator. Minimize door
openings and keep doors fully closed.
■
A large amount of warm food has been recently added - Allow several hours for refrigerator to return to
normal temperature.
■
Check that the Temperature Control(s) are set correctly for the surrounding conditions - Adjust the
controls to one setting colder. Check temperature in 24 hours. See “Using the Control(s).”
There is interior
moisture buildup
NOTE: Some
moisture buildup is
normal.
■
Humid room - Contributes to moisture buildup in the refrigerator.
■
Door(s) opened often or not closed completely - Allows humid air to enter the refrigerator. Minimize door
openings and keep door fully closed.
The ice maker is
not producing ice
or not enough ice
(on some models)
■
The ice maker is not connected to a water supply - Connect refrigerator to water supply and turn water
shutoff valve fully open.
■
A kink in the line can reduce water flow - Straighten the water source line.
■
Ice maker is not turned on - Make sure the ice maker wire shutoff arm or switch (depending on model) is
in the ON position.
■
New installation - Wait 24 hours after ice maker installation for ice production to begin. Wait 3 days for full
ice production.
■
Large amount of ice recently removed - Allow sufficient time for ice maker to produce more ice.
■
Ice cube jammed in the ice maker ejector arm - Remove ice from the ejector arm with a plastic utensil.
■
A reverse osmosis water filtration system connected to your cold water supply can decrease water
pressure - See “Water Supply Requirements.”
The ice cubes are
hollow or small
(on some models)
NOTE: This is an
indication of low
water pressure.
■
The water valve is not completely open - Turn the water shutoff valve fully open.
■
A kink in the line can reduce water flow - Straighten the water source line.
■
A reverse osmosis water filtration system connected to your cold water supply can decrease water
pressure - See “Water Supply Requirements.”
■
If questions regarding water pressure remain, call a licensed, qualified plumber.
Off-taste, odor or
gray color in the
ice (on some
models)
■
New plumbing connections can cause discolored or off-flavored ice - Discard the ice and wash the ice
storage bin. Allow 24 hours for the ice maker to make new ice, and discard the first 3 batches of ice
produced.
■
Ice stored too long can develop an off-taste - Discard ice. Wash ice bin. Allow 24 hours for ice maker to
make new ice.
■
Food odor transferring to ice - Use airtight, moisture proof packaging to store food.
■
There are minerals (such as sulfur) in the water - A water filter may need to be installed to remove the
minerals.
If you experience
Possible Causes and/or Recommended Solutions
Содержание WRT111SFDB
Страница 35: ...35 ...
