GB
7
with food that has already been defrosted. Fresh food must be
stored in the top FREEZER and STORAGE compartment where the
temperature drops below -18°C and guarantees rapid freezing.
• To freeze fresh food in the best and safest way possible, activate
the SUPER FREEZE function 24 hours before placing the food
in the freezer. After placing the food inside, activate the SUPER
FREEZE function again; it will be deactivated automatically after
24 hours;
• Do not re-freeze food that is defrosting or that has already been
defrosted. These foods must be cooked and eaten (within 24
hours).
• Do not place glass bottles which contain liquids, and which are
corked or hermetically sealed in the freezer because they could
break.
• The maximum quantity of food that may be frozen daily is indicated
on the plate containing the technical properties located on the
bottom left side of the refrigerator compartment (for example:
2Kg/24h: ).
! To avoid blocking the air circulation inside the freezer compartment,
it is advisable not to obstruct the ventilation holes with food or
containers.
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the freezer door.
This will help maintain the temperature inside the freezer, ensuring
that foods are conserved for at least 12-18 hours.
!To maximise space inside the freezer, all drawers can be removed
from their positions and the food placed directly on the racks/glass
shelves supplied [where present].
* SUPER
This compartment is used to lower the temperature of freshly
cooked meals in a very rapid way, by allowing a freezing process
until the core of the food. The SUPER drawer is the
ideal solution to quickly freeze freshly cooked food as well as
food that you want to store in the freezer. Thanks to the rapidity
of the lowering phase, ice crystals will be smaller and they won’t
damage the food when it’s defrosted.
Optimal usage of the SUPER drawer
In order to make an optimal usage of the SUPER
drawer, you need to insert it on the lower shelf of the freezer
compartment (as per figure 1). Moreover, in order to obtain a
rapid lowering from +70°C to -18°C in about 4,5 hours (for 1 kg
of food), position the food inside the drawer and switch on the
SUPER feature on the Control Panel.
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to disconnect
the appliance from the electricity supply:
1. Press the ON/OFF button to switch off the appliance.
2. Pull the plug out of the socket.
! If this procedure is not followed, the alarm may sound. This alarm
does not indicate a malfunction. To restore normal operation,
hold the ON/OFF button down for more than two seconds. To
disconnect the appliance, follow points 1 and 2 above.
Cleaning the appliance
• The external and internal parts, as well as the rubber seals
may be cleaned using a sponge that has been soaked in
lukewarm water and bicarbonate of soda or neutral soap. Do
not use solvents, abrasive products, bleach or ammonia.
• The removable accessories may be soaked in warm water
and soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be
removed by delicately using the hose of a vacuum cleaner set
on medium power. The appliance must be switched off and
the plug must be pulled out before cleaning the appliance.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which
are odour free. In order to maintain an odour free refrigerator
and to prevent the formation of stains, food must always be
covered or sealed properly.
• If you want to switch the appliance off for an extended period
of time, clean the inside and leave the doors open.
Replace LED * light
The LED lighting, thanks to the powerful diffused light, allowes
a clear view of each food. If you need to replace the LED light,
contact theTechnical Service.
Replacing the light bulb *
To replace the light bulb in the refrigerator compartment, pull out
the plug from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the
diagram. Replace it with a similar light bulb within the power
range indicated on the cover.
3
Precautions and tips
!
The appliance was designed and manufactured in compliance
with international safety standards. The following warnings are
provided for safety reasons and must be read carefully.
This appliance complies with the following Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
amendments;
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and
subsequent amendments;
- 2002/96/CE.
*
Varies by number and/or position, available only on certain
models.
Содержание WNF9 Series
Страница 10: ...GB 19515749601 07 2017 ...
