Whirlpool WNF9 Series, Руководство по эксплуатации

Страница: 3 / 10

3
Description of the appliance
Control panel
1. ON/OFF
The entire product (both the refrigerator and freezer compartments) may be
switched on by pressing this button.
2. REFRIGERATOR and temperature adjustment
Used to modify the temperature setting of the refrigerator; confirmation
corresponding to the selected temperature appears on the display.
3. Refrigerator display
Shows the set temperature for the refrigerator compartment.
4. ALARM
An alarm situation has been detected in the product (see Troubleshooting section).
5. FREEZER display
Shows the set temperature for the freezer compartment.
6. FREEZER and temperature adjustment
Used to modify the temperature setting of the freezer; confirmation
corresponding to the selected temperature appears on the display.
7. SUPER FREEZE
Thanks to the Super feature you can freeze in the suitable compartment
(see image below) “just cooked” foods (at a temperature of 70°C). This freezing
phase happens 50% faster than it would happen on a standard freezer, and
this offers immediate benefits on the food consistency. Food tissues are further
protected and bacterial growth is avoided.At the end of the freezing process the
temperature reverts to the programmed level.
In order to get better results, we recommend that you enable
this feature 1 hour before you start inserting food inside the
freezer compartment.
This feature works for max. 24 hours.
8. ECO*
Controls the activation and deactivation of the ECO
function (optimal operating temperature for minimal energy
consumption). Consumption will be optimised 24h after the
function was enabled. When this function is activated, the ECO
LED on the keypad lights up.Press and hold the ECO button
for 8 seconds so that the corresponding LED begins to flash;
this will allow you to set the temperature to in the Refrigerator
compartment and in the Freezer compartment. Two minutes
after the most recent user interaction, the display enters its
energy saving mode.To exit the energy saving mode, simply
press any button or open the refrigerator door.
8. ACTIVE OXIGEN*
Device is activated pressing the dedicated key on the display
located in front of the fridge door.
By holding the Active Oxygen button for 8 seconds you can
enable the ECO feature.
9. HOLIDAY
Activates or deactivates the HOLIDAY function (the HOLIDAY
LED on the keypad lights up), while the temperature values
+12°C and -18°C appear on the refrigerator and freezer
displays respectively. Two minutes after the most recent
user interaction, the display enters its energy saving mode
(see ECO function).
10. SUPER COOL
You can enable or disable the SUPER COOL feature (quick
cooling of both fresh and just cooked food).
On the keyboard the SUPER COOL LED turns on as well as
on the fridge display.
11. GOOD NIGHT
The Good Night function makes it possible to minimize
any noise, at the same time ensuring suitable storage
performance. The compressor will be working at the minimum
speed that can be set. When you start the function, the display
enters into standby mode and the relevant Good Night icon
lights up. The Good Night function can automatically stop
either after maximum 6 hours or after the performance of
the product with the function ON can no longer be ensured
owing to a number of different reasons.
To stop the function manually press the button again or switch
off the device - we recommend starting the function in the
night hours or minimizing any
interaction with the fridge to prevent the function from
stopping automatically.
* Available only on certain models.