4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools nee
d
e
d
for connecting the water inlet hoses
■
Pliers (that open to 1
9
/
16
[39.5 mm])
■
Flashlight (optional)
Tools nee
d
e
d
for connecting the
d
rain hose
■
Locking pliers (that open to 1
9
/
16
" [39.5 mm])
Tools nee
d
e
d
for installation
■
Open end wrenches 14 mm and 13 mm
■
Level
■
Wood block
■
Ruler or measuring tape
Parts supplie
d
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free number
on the cover or in the “Assistance or Service” section.
Options
Pe
d
estal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (254 mm) or a
15.5" (394 mm) pedestal. The pedestal will add to the total height
of the washer.
Optional pedestal
Stack Kit
Are you planning to stack your washer and dryer? To do so, you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your washer or
refer to the “Assistance or Service” section of this manual. Ask for
Part Number 8572546.
Location Requirements
Selecting the proper location for your washer improves
performance and minimizes noise and possible washer “walk.”
Your washer can be installed under a custom counter, or in a
basement, laundry room, closet, or recessed area. See “Drain
System.”
Companion appliance location requirements should also be
considered. Proper installation is your responsibility.
You will nee
d
■
A water heater set to deliver 120°F (49°C) water to the washer.
■
A grounded electrical outlet located within 6 ft (1.8 m) of
where the power cord is attached to the back of the washer.
See “Electrical Requirements.”
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Transport bolt hole plug (4)
E. Beaded strap
F. Drain hose
G. Hose clamp
If You Have
You Will Nee
d
to Buy
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
Overhead sewer
Standard 20 gal. (76 L), 30" (762 mm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose
Part Number 8318155; and connector
kit, Part Number 2858835
Drain hose too
short
4 ft (1.2 m) drain hose extension kit,
Part Number 2858863
Water faucets
beyond reach of fill
hoses
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314
10 ft (3.0 m) Part Number 350008
A
B
F
G
C
D
E
Pe
d
estal
Height
Approximate
Height with
Washer
Color
Mo
d
el
Num
b
er
10"
(254 mm)
46"
(1168 mm)
White
WHP1000SQ
10"
(254 mm)
46"
(1168 mm)
Cranberry
Red
XHP1000WR
15.5"
(394 mm)
51.5"
(1308 mm)
White
WHP1500SQ
15.5"
(394 mm)
51.5"
(1308 mm)
Cranberry
Red
XHP1550WR
15.5"
(394 mm)
51.5"
(1308 mm)
Lunar
Silver
XHP1550WL
