Whirlpool WFW5030JW, Инструкция по использованию и уходу

Страница: 11 / 72

11
8.
Select options, if desired
†
9.
Setting a delayed wash, if desired
†
If you do not want to begin a cycle immediately, you may
choose the Delay Wash option. This will delay the start
of the wash cycle by up to 24 hours.
To set a Delayed Wash:
1.
Touch the DELAY WASH button to set the desired delay
time.
2. Turn the knob to the number of hours you want to delay
the start of the wash cycle. The delay time will appear
on the display. Press the knob to confirm your selection.
After touching the Start/Pause button, the door will lock
and the time will count down until the delay time has been
reached. The washer will start and the display will show the
remaining time in the cycle.
Hot
Warm
Cool
X-hot
Cold
Colors
High
Med
Low
Max
Off
Rinse
Hold
ml
Delay
Wash
10.
Change temperature or spin speed,
if desired
†
Touch the TEMP or SPIN SPEED button; then turn the knob to
select the desired temperature or spin speed. As you turn the
knob, an indicator light will light up next to the temperatures
or spin speeds to the right of the knob. Stop turning when
the indicator next to the desired selection lights up. Press
the knob to confirm your selection.
Hot
Warm
Cool
X-hot
Cold
Colors
High
Med
Low
Max
Off
Rinse
Hold
ml
Temp Spin
Speed
Dosing Aid (Detergent Button):
The Detergent button calculates a recommended amount
of detergent in milliliters. This will be displayed after touching
the Start/Pause button and the load is detected. The Detergent
button also lets you adapt your washer to the dosing amounts
of your detergent and the hardness of your local water.
To set the washer for the detergent dosing amount:
1.
Check your detergent dosing amount for medium soil level
and medium water hardness.
NOTE: Do not add more than the dose recommended by the
detergent manufacturer.
2. Touch and hold the DETERGENT button
until the bottle symbol
on the display
lights up.
3.
Turn the knob to adjust the dosing value to the one shown
on the detergent bottle. Press the knob to confirm your
selection. See the chart in “About Detergent Concentration.”
Hot
Warm
Cool
X-hot
Cold
Colors
High
Med
Low
Max
Off
Rinse
Hold
ml
Wool
Handwash
Quick Wash
Rinse & Spin
Spin
To set the washer for local water hardness (washer is
preset for soft water):
1.
Check your regional water hardness level by consulting
your local authorities or the Internet.
2.
If your water is not soft, touch and hold the PROGRAM and
DETERGENT buttons at the same time. “1” (for soft water)
appears on the display.
3. Turn the knob to adjust the water level to either “2”
(Medium) or “3” (Hard). Press the knob to confirm your
selection.
Detergent
3 Sec
P
Program
Detergent
3 Sec
Hot
Warm
Cool
X-hot
Cold
Colors
High
Med
Low
Max
Off
Rinse
Hold
ml
Wool
Handwash
Quick Wash
Rinse & Spin
Spin
† Not all options and settings are available with all program/cycles.
See “Program/Cycle Guide” for available options and settings.