5019 300 01486
Whirlpool is a registered trademark of Whirlpool USA
“Prewash” key
Adds a prewash cycle to the wash programme
selected; prolongs the programme by about a
quarter of an hour.
Recommended for heavily soiled laundry (e.g.
containing sand or granular dirt).
“Spin” key
(incl. “Rinse Hold”
)
Select a spin speed differing from the preset one.
If you select spin speed “0”, the final spinning is
cancelled and the water is drained out only.
However, intermediate spin phases remain during
the rinse.
If you select “Rinse hold”
, the laundry remains
in the last rinse water without progressing to the
final spin cycle, to avoid creasing and prevent
colours from changing. To activate the “Rinse hold”,
press the “Spin” key repeatedly until the “Rinse
hold” symbol
on the display lights up.
- The wash programme stops to “Rinse hold”
when the “Rinse hold” symbol
on the
display blinks; the
“Start/Pause”
indicator
blinks as well.
- To terminate the “Rinse hold” by spinning the
laundry, press
“Start/Pause”
- the laundry will be
spun with the default spin speed. You can also
select another spin speed with the “Spin” key before
you start the spin cycle with
“Start/Pause”
.
- To terminate the “Rinse hold” by draining the
water without spinning, press the “Spin” key
until spin speed “0” appears on the display; then
press
“Start/Pause”
to start the draining.
- Do not leave the laundry to soak for too long in
the “Rinse hold” (especially silk!).
You can postpone your programme to complete at a
later time: press the key to select in how many hours
the programme shall be finished. Thus, it allows you to
have your laundry ready at a particular time and to
benefit from more favourable energy rates during the
night, for example.
• The delay can be selected in full hour time
segments (1 to 24 h). When you press the key, the
shortest possible time will be displayed; keep on
pressing the key to loop through all the available
times. To remove it again, keep on pressing the
key until you see the value “0:00”.
• When you have selected the desired delay, press
“Start/Pause”
- the countdown will begin.
• During the countdown, you can still modify the
programme setting (select or deselect options,
change spin speed etc.). If the modifications
prolong the programme duration so that it
overruns the originally set delay, the programme
will start immediately.
• Sometimes the programme may finish before
the selected delay has expired (e.g. for small
loads). In this case, the washing machine will
tumble the laundry regularly to keep it fresh,
until the selected delay has expired. During
tumbling, the display will show an animation.
The tumbling phase can be stopped at any time
either by pressing any button or by rotating the
programme selector; the animation will stop
and the door will unlock in about 1 minute as
indicated on the display.
With the “Dosing Aid” key, you can make your
washing machine indicate you the recommended
detergent quantity for your wash load, depending on
the soil level selected and the size of the load.
• Helps to save detergent and protect the
environment and also sensitive skin by avoiding
detergent overdosing.
• Before you use this function, you must adapt the
washing machine to the dosing amounts which
are recommended for the detergents you use.
Also check if your region’s water hardness
corresponds with the water hardness level “soft”
of your washing machine - if not adapt it.
• Select programme, options and cycle end before
pressing the “Dosing Aid” key.
For any details, refer to the separate “Dosing Aid”
Instructions for Use.
Before starting and after end of a programme, the
indicator lights to show that the door can be opened.
As long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Reset a
running programme before the end”.
The “Eco monitor” gives you a rough feedback about
the power consumption of the programme setting
you selected.
As soon as you turn the programme selector to any
programme, the “Eco monitor” is on.
The indicator on the left is to show that the “Eco
monitor” is active. The four indicators next to it show
SET A DELAY
DETERGENT DOSING
RECOMMENDATION
“DOOR OPEN” INDICATOR
ECO MONITOR
the degree of consumption: the less power your
programme setting is forecasted to consume, the less
indicators will light up. This depends on the
programme, temperature and options selected, and
also on the size of the wash load. For that reason, the
forecasted degree of power consumption may adapt
when the washing machine detects the wash load.
When you select a programme, the drum light will
slowly go on to assure a good visibility during laundry
loading.
After starting your programme with
“Start/Pause”
,
the drum light will fade on and off while the
washing machine detects the laundry load.
Subsequently, it will go off.
When the programme is finished, the light goes on
again for a short time; afterwards it will go off
automatically to save energy. If you want to switch
it on again for unloading your laundry, just press
any option button or turn the programme selector
(but not to “Off/O”).
The drum light will blink fast when a failure is
detected.
Open the tap and press the
“Start/Pause”
button .
The
“Start/Pause”
indicator lights up. When the
laundry load is detected or the programme
duration is adapted, the display shows an
animation.
Prevents children from starting a wash cycle or
changing the settings of a running programme.
Cannot be activated or deactivated when the
programme selector is in the “Off/O” position.
To activate the child lock:
• Turn the programme selector to a programme
position, or run a programme as usual.
• Press and hold the 2 buttons marked with the
key symbol
simultaneously for a few
seconds. A key symbol will appear on the display
to indicate that the child lock is active.
Any time you try to change a programme setting
with active child lock, a signal will sound; it cannot
be changed anymore. The only change possible is
to switch the washer off by turning the programme
selector to the “Off/O” position. To deactivate the
child lock, proceed in the same way as for activating
it (signal will sound twice).
Press and hold the marked keys simultaneously for a
few seconds to switch off the peep sound of the
buttons and at the end of the programme; a long
signal sounds. To switch it on again, proceed in the
same way; a short signal sounds twice.
If one of the failure indicators lights up, or in case of
any malfunction, consult the “Troubleshooting Guide”
in your Instructions for Use.
Spin speed on display blinks:
Unbalance during
spinning.
•
The “Door open” indicator lights up. The
display shows “End”. After about a quarter of an
hour, the washing machine will switch off
completely to save energy.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
The symbol will light up at the end of the
programme if you used too much detergent. Use
less detergent next time.
1. Press the
“Start/Pause”
button to pause the
programme. The indicator blinks.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The new
programme continues at the same position
where the previous programme was
interrupted. Do not add detergent for this
programme.
The
“Reset/Drain”
button cancels a running programme.
•
Press and hold the
“Reset/Drain”
button for a few
seconds; an animation appears on the display.
The water is drained out; it may last some time until
you can open the door.
DRUM LIGHT
PROGRAMME START
CHILD LOCK
SOUND OFF
FAILURE INDICATORS
PROGRAMME END
DETERGENT OVERDOSAGE INDICATOR
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
RESET A RUNNING PROGRAMME
