Whirlpool WFCR 86430, Инструкция по безопасности, эксплуатации и установке

Страница: 11 / 52

11
11
EN
1. Follow the instructions given in the
paragraph “Wash Only” to select and, if
necessary, customise the required programme.
2. Press “Drying settings” to select the
required drying mode. Two drying modes are
available: automatic or timer.
- Automatic drying with selectable levels:
In automatic drying mode, the washer dryer
machine dries the laundry until the set level of
dryness is reached. Pressing button “Drying
settings” once automatically selects the
highest drying level available for the selected
programme. Press the button again to reduce
the drying level.
The following levels are available:
Wardrobe : laundry is completely dry and
ready to be put away in the wardrobe without
ironing.
Hanger : laundry is left slightly damp to
minimise creasing. Garments must be hung to
air dry completely.
Iron : garments are left reasonably damp to
make ironing easier.
- Timer drying mode:
Press button “Drying settings” repeatedly to
set timer drying mode. After cycling through all
the automatic drying levels, continue pressing
button “Drying settings” until the desired time
is displayed. Values from 210 to 30 minutes are
settable.
To wash a load of laundry larger than the
maximum permissible load for drying ( see
the column “ Max. load for drying cycle ” in the
Programme chart) , remove a few garments once
the drying cycle. Proceed as follows:
1. Follow the instructions given in the
paragraph “Wash Only” to select and, if
necessary, customise the required programme.
2. Do not include a drying cycle .
3.
door and remove a few garments to reduce
the load. Now follow the instructions for “Dry
only”.
N.B.: always allow a cooling down period after
drying before opening the door.
When using the two preset cycles “Wash & Dry
45’” and “Wash & Dry 90’”, it is not necessary to
select and start a drying cycle.
Dry only
This function is used to simply dry a wet load
washed previously in the washer dryer or by
hand.
1. Select a suitable programme for the laundry
you want to dry (e.g. select cotton to dry wet
cotton laundry).
2. Press button “Dry only” to dry without a wash
cycle.
3. Press “Drying settings” to select the required
drying mode. Two drying modes are available:
automatic or timer.
- Automatic drying with selectable levels:
In automatic drying mode, the washer dryer
machine dries the laundry until the set level
of dryness is reached. Pressing button “Drying
settings” once automatically selects the
highest drying level available for the selected
programme. Press the button again to reduce
the drying level.
The following levels are available:
Wardrobe : laundry is completely dry and
ready to be put away in the wardrobe without
ironing.
Hanger : laundry is left slightly damp to
minimise creasing. Garments must be hung to
air dry completely.
Iron : garments are left reasonably damp to
make ironing easier.
- Timer drying mode:
Press button “Drying settings” repeatedly to
set timer drying mode. After cycling through all
the automatic drying levels, continue pressing
button “Drying settings” until the desired time
is displayed.
Values from 210 to 30 minutes are settable.
N.B.: always allow a cooling down period after
drying before opening the door.
5.
USING THE CORRECT AMOUNT OF
DETERGENT. Pull out the tray and pour
detergent into the relative compartments
as described in “ Detergent dispenser ”. This is only
necessary when using a wash only or a wash
+ dry programme.
6.
DELAYING THE START OF A PROGRAMME.
To set a programme to start at a later time,
see the section “Options and Functions” .
7.
STARTING A PROGRAMME.
Press the START/PAUSE button. The relative
indicator lamp illuminates, the door locks and
the door open symbol extinguishes. To
change a programme while a cycle is in progress,
press START/PAUSE to pause the washer dryer
then select the required cycle and press START/
PAUSE again. To open the door while a cycle is in
progress, press START/PAUSE; the door may be
opened if the symbol lights. Press the START/
PAUSE button again to resume the programme
from where it was paused.
8.
Press and hold the button until the washer
dryer stops.
If the water level and temperature are low
enough, the door unlocks and may be opened.
The door remains locked if there is water in the
drum. To unlock the door, switch the washer
dryer on, select the
SPIN & DRAIN
programme and
speed to 0. The water is emptied and the door
unlocks at the end of the programme.