29
Storage Drawer
The storage drawer can be removed. Before removing, make sure
drawer is cool and empty.
To Remove:
1.
Pull the storage drawer straight back past the drawer stop
notch and the end of the side rails.
2.
Lift up the back of the drawer and pull the drawer out.
To Replace:
1.
Lift up the back of the drawer and place it inside the range in
its fully forward position.
2.
Lift up the front of the drawer to a level position.
3.
Slowly push the drawer into the range until the drawer side
rails engage with the gap in the drawer glides.
4.
Once the drawer is fully engaged on both sides, slide the
drawer back into the closed position.
NOTE:
When you are removing and replacing the storage
drawer, a slight push may be needed to move the drawer
stop notch past the drawer glides.
Warming Drawer
(on some models)
Remove all items from inside the warming drawer, and allow the
unit to cool completely before attempting to remove the drawer.
To Remove:
1.
Open drawer to its fully open position.
2.
Locate the black triangle-shaped tabs on both sides of the
drawer.
3.
Press the tab down on the right side, and lift tab up on the left
side at the same time, then pull drawer out another inch.
4.
Holding the drawer by its sides, slowly pull it all the way out.
To Replace:
1.
Align the drawer glides with the receiving guides.
2.
Push drawer in all the way.
3.
Gently open and close the drawer to ensure it is seated
properly on the slides.
A. Drawer stop notch
B. End of side rail
A. Engage drawer glide
A
B
A
A. Tab
A
