background image

2

Premium Top Rack Adjuster

You can raise or lower the top rack to fit tall items in either the top or 

bottom rack. Adjusters are located on each side of the top rack.

To raise the rack: 

Press both rack adjuster thumb 

levers and lift the rack until it is  

in the up position and level.

To lower the rack:

Press both rack adjuster thumb 

levers and slide the rack to its 

down position and level. 

NOTE: 

The top rack must  

be level.

Drying – Rinse aid is essential

You must use a drying agent such as a rinse 

aid for good drying performance. Rinse aid 

along with the Heat Dry option will provide 

best drying and avoid excessive moisture  

in dishwasher interior.

SLIDE

Filtration System and Maintenance

Your dishwasher has the latest  

technology in dishwasher filtration. 

This filtration system minimizes 

sound and optimizes water and 

energy conservation while providing 

superior cleaning.
The filter system consists of two  

parts, an upper filter assembly  

and lower filter.

IMPORTANT:

 To avoid damage to dishwasher, do not operate your 

dishwasher without filters properly installed. Be sure lower filter is 

securely in place and upper filter assembly is locked into place. If 

upper assembly turns freely, it is not locked into place.

The filters may need to be cleaned when:

 

Visible objects or soils are on upper  

filter assembly.

 

Dishes feel gritty to the touch.

See “Filtration System” in the full User 

Instructions for complete removal and 

maintenance schedule.

IMPORTANT:

 Do not use a wire brush or  

a scouring pad, etc., as they may damage  

the filters.
Rinse filter under running water until soils are 

removed. If you have hard to remove soils or 

calcium deposits because of hard water, a soft 

brush may be required.

P

U

S

H

D

O

W

N

&

TU

R

N

LO

C

K

U

N

L

O

CK

Upper filter 

assembly

Lower filter

Tip Over Hazard

Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.

WARNING

GROUNDING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

■  

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a 

malfunction or breakdown, grounding will reduce the risk of 

electric shock by providing a path of least resistance for 

electric current. The dishwasher is equipped with a cord 

having an equipment-grounding conductor and a grounding 

plug. The plug must be plugged into an appropriate outlet 

that is installed and grounded in accordance with all local 

codes and ordinances.

WARNING:

 Improper connection of the equipment-

grounding conductor can result in a risk of electric shock. 

Check with a qualified electrician or service representative if 

you are in doubt whether the dishwasher is properly 

grounded. Do not modify the plug provided with the 

dishwasher; if it will not fit the outlet, have a proper outlet 

installed by a qualified electrician.

■  

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal, 

permanent wiring system, or an equipment-grounding 

conductor must be run with the circuit conductors and 

connected to the equipment-grounding terminal or lead on 

the dishwasher.

KEY USAGE TIPS

Содержание WDT730PAHZ

















Отзывы: