Whirlpool WDF540PADB Скачать руководство пользователя страница 4

4

Rinse aid keeps water from forming droplets that can dry 
as spots or streaks. It also improves drying by allowing 
water to drain off of dishes after final rinse. Rinse aid does 
not adhere to dishware and when used, it is dispensed 
during each cycle.

To add rinse aid, turn the 
dispenser cap ¼ turn 
counterclockwise and lift off. Pour 
rinse aid into the opening until 
indicator level is at “Full.” Replace 
dispenser cap and turn to “Lock.” 
Make sure cap is fully locked. 

NOTE: For most water conditions, the factory setting will give good 
results. 

Check water hardness level to ensure there are 
no rings or spots on your dishware before 
adding rinse aid or adjusting the factory setting.

If you are experiencing poor drying 
performance, you may want to try a higher 
setting. 

Turn the arrow adjuster inside the dispenser to 
change rinse aid setting. 

5.

Select a Cycle (cycles vary by model)

Efficient dishwashers run longer to save water and energy, just as 
driving a car slower saves on gas. Typical cycle time is approximately 
2

¹⁄₂

 hours, but can take less or more time to complete depending on 

selections.

6.

Select Options (options vary by model) 

You can customize your cycles by pressing the options desired. If you 
change your mind, press the option again to turn off the option. Not all 
options are available for every cycle. If an invalid option is selected for a 
given cycle, the lights will flash. Adding options may increase the cycle 
time displayed.

7.

Follow the Progress of your Dishwasher

The full lit display will glow for wash, drain, 
drying, sanitized, and clean. It will also 
display the remaining time for the cycle in 
hours and minutes.

Select the desired cycle by pressing the 
Cycles button. Each time the cycles button is pressed the next available 
cycle will be displayed.

8.

Start or Resume a Cycle

NOTE: Run hot water at the sink nearest your dishwasher until the 
water is hot. Turn off water.

If the Start/Resume button is located on top of door; push door 
firmly closed within 3 seconds of pressing START/RESUME. If door 
is not closed within 3 seconds, the start button LED will flash, an 
audible tone will be heard, and cycle will not start.

IMPORTANT: If anyone opens the door (such as, for adding a dish, 
even during the Delay Hours option), the START/RESUME button must 
be pressed each time. 

If your Start/Resume button is located on front of door: push door 
firmly closed. The door latches automatically. Select the wash 
cycle, options and press START/RESUME or press 
START/RESUME to repeat the same cycle and options as in 
previous wash cycle.

This information covers several different models. Your dishwasher may not have all of the cycles and options described. Estimated cycle times 
may increase or decrease depending on water temperature, soil conditions, dish load size, and options selected. 

Full

Add

RINSE AID

IMPROVES DRYING

CHECK

WITH DOOR

FULLY OPEN

Full

Add

Lock

CYCLES

 ESTIMATED 

WASH TIME 

DISPLAYED* 

H:MM

W/O OPTIONS

WATER USAGE 

GALLONS 

(LITERS)

The most advanced and versatile cycle. This cycle senses load size, soil amount, and 
toughness of soil, to adjust the cycle for optimal cleaning using only the amount of water 
and energy needed. Use for all soil levels.

2:30

3.38 to 7.4

(12.8 to 28.0))

Use for hard-to-clean, heavily soiled pots, pans, casseroles, and tableware. 

3:28

7.4

(28.1)

This cycle with only the Heated Dry option selected, and without other options selected, 
is recommended to completely wash and dry a full load of normally soiled dishes. The 
energy usage label is based on this cycle and option combination.

2:32

2.4 to 7.4

(9.09 to 28)

For fast results, 1-Hour Wash will clean dishes using more water and energy. Select the 
Heat Dry option to provide best dry performance. May be used for all soil levels.

1:00

7.87 (29.8)

This cycle quietly soaks dishes with an extended prewash which eliminates the need to 
presoak dishes saving personal time and effort. For optimal cleaning results during the 
Soak & Clean cycle add prewash detergent. Use this cycle for loads with heavy amounts 
of dried on or hard to clean baked-on food. 

7:31

7.4 (28.0)

CYCLE GUIDE

Содержание WDF540PADB

















Отзывы: