10
ELECTRICAL CONNECTION
Power Supply Cord
Direct Wire
Electrical Connection Options
1.
Choose electrical connection type
Power supply cord 4-wire receptacle
(NEMA Type 14-30R):
Go to “4-wire
Power Supply Cord Connection” section.
Then, go to “Venting Requirements.”
3-wire direct connection:
Go to “3-wire
Direct Wire Connection” section. Then go
to “Venting Requirements.”
4-wire direct connection:
Go to “4-wire
Direct Wire Connection” section. Then go
to “Venting Requirements.”
Power supply cord 3-wire receptacle
(NEMA Type 10-30R):
Go to “3-wire
Power Supply Cord Connection” section.
Then go to “Venting Requirements.”
NOTE:
If local codes do not permit connection of a
cabinet-ground conductor to neutral wire, go to “Optional
3-wire Connection” section. This connection may be
used with either a power supply cord or a direct wire
connection.
B
C
A
D
2.
Remove terminal block cover
Before you start, disconnect power. Remove hold-down
screw (B) and terminal block cover (C). Install strain relief.
A. Center terminal block screw
B. Hold-down screw
C. Terminal block cover
D. External ground conductor screw
Содержание W10558490A
Страница 2: ...2 WASHER DRYER SAFETY ...
Страница 23: ...23 NOTES ...
Страница 24: ...02 13 W10558490A Printed in U S A TM 2013 Whirlpool All rights reserved ...
