25
Remember
■
Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.
■
The quality of your ice will be only as good as the quality of
the water supplied to your ice maker. Avoid connecting the
ice maker to a softened water supply. Water softener
chemicals (such as salt) can damage parts of the ice maker
and lead to poor quality ice. If a softened water supply cannot
be avoided, make sure the water softener is operating
properly and is well maintained.
■
Do not store anything on top of the ice maker or in the ice
storage bin.
CARACTÉRISTIQUES DU CONGÉLATEUR
Ce manuel couvre plusieurs modèles différents. Le congélateur
que vous avez acheté peut comporter certaines ou toutes les
caractéristiques indiquées ci-dessous. Les emplacements des
caractéristiques peuvent ne pas correspondre au modèle que
vous avez.
Shelves
Store similar foods together and adjust the shelves to fit different
heights. This reduces the time the refrigerator door is open and
saves energy.
To remove and replace a shelf:
1.
Remove the shelf by pulling it forward slightly to align the
shelf stops with the openings in the refrigerator compartment
liner. Lift straight up, and pull the shelf out the rest of the way.
■
Replace the shelf by lowering the shelf stops through the
openings in the refrigerator compartment liner. Slide the shelf
in the rest of the way.
Door Bin
To remove and replace the bin:
1.
Remove the bin by tipping the front of the bin up and sliding
out.
2.
Replace the bin by sliding it in above the desired support
tilting it back into place.
Storage Bin
(on some models)
The slide out bin provides separate storage space for items that
are difficult to store on freezer shelves.
To extend the bin fully, lift up and slide forward. To remove the
basket slide out.
