Complete installation
1.
Place the lower panel behind the toekick panel.
2.
Place 2-piece toekick against the legs of the dishwasher.
3.
Place the inner toekick piece (with slots) against the
toekick bracket. The slots should align with toekick
bracket screw holes. Allow the bottom edge of the
lower toekick to touch the floor.
4.
Place larger toekick over the inner piece and install 4
toekick screws. Use additional 2 screws for installations
over 33-1/2" (85.09 cm) high. Use both toekick pieces
for all installation heights.
Direct wire method:
WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Use top 4
screw holes
Adjust up
or down
2-piece toekick
15
5.
Reconnect power or plug in dishwasher.
Power supply cord method:
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Hop hook
St4 countersunk
head screw
Lower hook
Installation of
panel
custom
Weight < 2.5 kg
