5
PREPARATION BEFORE USE
SAFETY PRECAUTIONS
Before using the air conditioner, be sure to check and preset the following.
Remote Control presetting
The remote control is NOT preset as Cooling Only Air Conditioner or Heat Pump by manufacturer.
Each time the remote control batteries are replaced, the Cooling indicator
and Heating indicator
will flash
alternately on the remote control LCD.
The user can preset the remote control depending on the air conditioner type purchased as follows:
Pressing any button when
flashes, Heat Pump is set.
Pressing any button when
flashes, Cooling Only is set.
If you don’t press any button within 12 seconds, the remote control is preset as Heat Pump automatically.
Note:
If the air conditioner you purchased is a Cooling Only one, but you preset the remote control as Heat
Pump, it doesn’t matter. But if the air conditioner you purchased is a Heat Pump one, and you preset the
remote control as Cooling Only, then you CANNOT preset the Heating operation with the remote
control.
Back-light function (optional)
Pressing any button of the remote control for about 2 seconds, the back-light turns on. Once the button is released,
it automatically turns off after 10 seconds.
Note: Back-light is an optional function.
Auto Restart Presetting
The Auto restart function is not preset by the manufacturer. To set the auto restart function, press the Emergency
button (ON/OFF) on the indoor unit for at least 5 seconds. A buzz sound will signal that the auto restart function is
set and the air conditioner is in standby.
To cancel the auto restart function, press the Emergency button (ON/OFF) on the indoor unit for at least 5 seconds.
A buzz sound will signal that the auto restart function is cancelled and the air conditioner is in standby.
Be sure not to do the following.
It is harmful to your health if the cool air reaches you for a long time. It is
advisable to let the air flow be deflected to all the room.
Prevent the air flow from reaching the gas burners and stove.
Do not touch the operation buttons when your hands are wet.
Pay attention to such a situation.
Do not repair the appliance by yourself. If this is done incorrectly, it may
cause an electric shock, etc.
Be sure to follow this instruction.
Do not put any objects on the outdoor unit.
Earthing is essential.
It is the user’s responsibility to have the appliance be earthed according to
local laws by a qualified technician.
Warning: Incorrect handling could cause a serious hazard, such as
death, serious injury, etc.
Use correct power supply in accordance with the rating plate
requirement. Don't use any extension cord for power supply. Otherwise,
serious faults or hazard may occur or a fire may break out.
Keep the power supply circuit breaker or plug from dirt. Connect the
power supply cord to it firmly and correctly, lest an electric shock or a fire
break out due to insufficient contact.
Do not use the power supply circuit breaker or pull off the plug to turn it
off during operation. This may cause a fire due to spark, etc.
Do not twist, pull or press the power supply cord, lest the power supply
cord be broken. An electric shock or fire is probably caused by a broken
power supply cord.
Never insert a stick or similar obstacle in the unit. Since the fan rotates at
high speed, this may cause an injury.
Turn off the appliance with remote control first before cutting off power
supply if malfunction occurs.
33933049GB.fm Page 5 Monday, January 10, 2005 5:27 PM
