manualshive.com logo in svg
background image

6

Make Electrical Connection

This range is manufactured with a neutral (white) power supply 
wire and a cabinet-connected green (or bare) ground wire twisted 
together.

1. Disconnect power.

2. Feed the flexible cable conduit from the range through the 

opening in the cabinet. 

3. Remove junction box cover if it is present.

4. Install a UL listed or CSA approved conduit connector to the 

junction box.

5. Route the flexible cable conduit from the range to the junction 

box through a UL listed or CSA approved conduit connector.

6. Tighten screws on conduit connector.

7. See “Electrical Connection Options Chart” to complete 

installation for your type of electrical connection.

Electrical Connection Options Chart

4-Wire Cable from Home Power Supply

IMPORTANT: Use the 4-wire cable from home power supply 
where local codes do not allow grounding through neutral, New 
Branch circuit installations (1996 NEC), mobile homes, 
recreational vehicles, and new construction.

1. Connect the 2 black wires (B) together using a UL listed wire 

connector.

2. Connect the 2 red wires (C) together using a UL listed wire 

connector.

3. Untwist white wire from green (or bare) ground wire coming 

from the range.

4. Connect the 2 white wires (F) together using a UL listed wire 

connector. 

5. Connect the green (or bare) ground wire (H) from the range 

cable to the green (or bare) ground wire (in the junction box) 
using a UL listed wire connector.

6. Install junction box cover.

3-Wire Cable from Home Power Supply

IMPORTANT: Use the 3-wire cable from home power supply 
where local codes permit a 3-wire connection.

1. Connect the 2 black wires (C) together using a UL listed wire 

connector.

A. UL listed or CSA approved conduit connector

If your home has:

Go to section:

4-wire

4-wire Cable from Home 
Power Supply

3-wire

3-wire Cable from Home 
Power Supply

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, 
fire, or electrical shock.

A

½"

(1.3 cm)

½"

(1.3 cm)

A. Cable from home power supply
B. Black wires

C. Red wires
D. 4-wire flexible cable from range

E. Junction box

F. White wires

G. UL listed wire connectors

H. Green (or bare) ground wires

I. UL listed or CSA approved 

conduit connector

A. Cable from home power supply
B. Junction box

C. Black wires
D. White wires

E. Green (or bare) ground wire 

(from range)

F. 4-wire flexible cable from 

range

G. Red wires

H. UL listed wire connectors

I. UL listed or CSA approved 

conduit connector

A
B

C

D

E

F

G

H

I

B

C

D

E

F

H

G

A

I

Содержание RS696PXGQ









Отзывы: