MSEX0105i – Electronic No Frost Refrigerator Bottom Mount/ Dual Fan - Maestro High
33
8 – DOOR REVERSAL
This Refrigerator comes assembled from the factory, with the doors opening towards the right side
(hinges and bushings are located on the right side, when facing the product).
In order to change the doors opening, that is, to cause it to open towards the left side, the specific left-
hand clicking bushings (Refrigerator & Freezer Door) and Centre Hinge for reversal should be replaced
and the below steps followed.
Left-Hand items required for Reversal
Note:
•
The right clicking bushings and centre hinge, initially assembled on the
product, will not be used any longer.
•
The upper and lower hinges remain the same, so there is no need to
replace them.
•
For white color version, the spare parts are white color
•
For stainless steel finish and silver color version, the spare parts are
gray color
REF.
PART NUMBER
DESCRPTION
QTY.
326.048.134
Kit for door reversion left hand – White color (White product)
1
326.037.537 Clicking Bushing for door reversion left hand – White color
2
2
326.034.581 Intermediary Hinge for door reversion left hand
1
3*
326.037.585 Plug, door – White color
4
4
326.042.729 Pin, lower hinge for door reversion left hand
1
5
Not available EPS, shim (to help reversal process)
1
326.048.135
Kit for door reversion left hand – Gray color (Inox & Silver products)
1
326.038.447 Clicking Bushing for door reversion left hand – Gray color
2
2
326.034.581 Intermediary Hinge for door reversion left hand
1
3*
326.037.587 Plug, door – Gray color
4
4
326.042.729 Pin, lower hinge for door reversion left hand
1
5
Not available EPS, shim (to help reversal process)
1
Note:
* Items used for damage removal case
To revert the door opening, do as follows:
1- Product preparation
•
Disconnect the product from the power outlet
•
Remove all door shelves (Freezer & Refrigerator) to prevent them from falling during the procedure;
2- Disassembling the Refrigerator Door/ preparing the upper wiring harness (Interface Board)
•
Using screwdriver, remove the upper hinge Cover;
•
Disconnect the Interface board (LCD Display) wire connectors;
1
2
3
4
5
