STEP 4
1. Slide microwave oven part way into cabinet
opening.
(Bottom brackets must be flat to the cutout
floor to engage correctly with anti-tip brackets
as shown)
2. Plug in the microwave oven.
3. Center the microwave oven within the
cut-out opening and slide the microwave oven
in place, engaging the anti-tip brackets.
(Ensure the microwave oven is accurately
centered)
4. Drill pilot holes (use 7/64
”
drill or #35 drill)
through the positioning flange and then install
three 1/2
”
screws at the front of the bottom
duct as shown.
Bottom Duct
Anti-Tip
Bracket
Bottom Bracket
1
/2
"
Screw
Anti-Tip Assembly
Positioning
Flange
Cutout
Opening
1/2
"
Screw
STEP 3
1. On the cutout floor, mark hole centers for the
anti-tip brackets as shown using the supplied
template. Be sure to align the center line of
template to center line of cutout floor.
2. Drill two holes for anti-tip bracket.
(use 7/64
”
drill or #35 drill)
3. Install anti-tip bracket onto cutout floor using
two 1/2
”
screws.
DIMENSIONS:
A = 4
1/4
”
B = 3
”
C = 18
3/16
”
A
B
C
Cutout Floor
Center Line
Anti-Tip Bracket
1/2
"
Screws (2)
