Whirlpool MID-LINE DESIGN, Руководство пользователя

Страница: 42 / 108

36
NEW DESIGN 14 cu. ft. Top-Mount
Fig. 42
14, 16 & 18 cu. ft. Top-Mount
Door Swing reversal
1. Open the refrigerator door and remove the toe
panel at the bottom of the unit.
2. Remove the top hinge. (Fig. 42)
3. Remove the freezer door.
4. Remove the center hinge.
(Fig. 42)
5. Remove the refrigerator door.
6. Remove the bottom hinge.
(Fig. 42)
7. Lay the freezer door on a flat protected surface
and remove the door handle.
(Fig. 42)
8. Reinstall the freezer door handle on the oppo-
site side of the door.
9. Lay the refrigerator door on a flat protected
surface and remove the door handle. (Fig. 42)
10. Reinstall the refrigerator door handle on the
opposite side of the door.
11. Move the bottom hinge to the opposite side of
the cabinet and reinstall it.
12. Set the refrigerator door on the bottom hinge
and close the door to keep it in place.
13. Reinstall the center hinge.
14. Set the freezer door in the center hinge and
close the door to keep it in place.
15. Reinstall the top hinge.
16. Align the doors. (See procedures on page 33.)
Cover for
Refrigerator Door
Handle
Screw Hole
Fig. 43
Cap
Cap
Spacer
Spacer
Screw
Cap
Spacer
Cap
Spacer
Cap
Screw