It’s the installer’s responsibility to fulfill with the spaces specified in this manual.
The location of the range should be away from the elements and over a flat resistant surface.
Don’t install your range over a carpet or any flammable
material. If the ground under the range is synthetic, make sure it withstand at least 95°C without
damage.
Keep the areas surrounding the range free from gasoline and other flammable liquids and
vapors.
Don t get to close from the flames on the burners, don’t use loose clothing when operating the
cooktoop.
Provide the correct maintenance to the appliance.
Use this range for household use only, this is not a commercial appliance.
If you need to move your range, don’t lift or take it from the handles. Always open the oven door,
lift from the upper part of the cavity and move.
Keep this document for future reference.
The correct installation of this appliance is your responsibility, we strongly recommend you to
have a qualified technician or Whirlpool Service Technician to install your new range.
RECOMMENDATIONS
RANGE INSTALLATION
Remove the adhesive tape and packaging materials.
Identify and separate all the parts of the appliance.
The best location for your new range should be in a place protected from wind flow and with
enough space to open the door oven.
Don’t install cabinets or other furniture over the range.
If hood will be installed, make sure it is at least 61 cm from the range.
If the range has accessories that need a power supply, make sure the installation is close from a
wall outlet.
INSTALLATION
Risk of Injury due to Overweight
· Use two or more people to move and install your product.
· Failure to do so may cause damage to your spine or injured.
WARNING
“THIS APPLIANCE SHOULD NOT BE INSTALLED IN BATHROOMS OR BEDROOMS”
30
