Whirlpool LSA 1100, Руководство пользователя

Страница: 18 / 24

Whirlpool | User Manual
18
Easy Trouble Shooting that Keeps you in Control
pRobleM checklists
ensure that there is no power cut-off and the electric fuse or circuit
breaker is not blown. The power cord should be correctly connected to
an electrical outlet. Make sure that the lid is closed properly.
• ensure that the drain hose’s free end is not hooked up in the machine.
if so, put it down on the floor.
• make sure that there is no blockage in the drain hose and it should be
put flat on the floor.
• drain hose should not be kinked.
• Check if any part of the drain hose is higher than 20cms from the floor
or the extention drain hose is longer than 3m.
• ensure that the cloth mover is not touching any foreign object.
• make sure that there are no foreign objects in the wash tub.
• Adjust the machine if it is on an uneven floor.
ensure that the inlet water pressure is not too low. Make sure to use high
compact detergent.
ensure that the lid is firmly closed.
Drain error
Lid Open error
Machine
not
working
at all
Abnormal
Noise
during
washing
Detergent
not being
consumed
• this error will pop up approximately after 10 min, if there is no or Very
low water supply.
• Check if the water tap is closed or if water inlet pipe filter or inlet valve
filter is blocked with foreign objects.
• if yes, open the tap / clean the filter (refer page 16) and then press
‘StArt / PAUSe’ button again.
• Always ensure that there is adequate supply of water to the machine
(refer page 6 for required water pressure)
Fill error – Beep
sound with Check
water led flashing
The supply voltage may be too low or too high. The machine will resume
automatically when the normal voltage comes back.
Power error
• PF error indicates any power failure while ‘delay end’ feature is
functioning.
• this is just for the information to the customer and will not impact the
wash process.
Power failure
error
note: during machine operation or during water filling, if the customer opens the lid, then the display will show
lid open error and no water will enter into the basket/machine.
• too much suds may cause motor temperature overload. Wait for short
time to recover.
• if error / problem persists, call your nearest authorized Service Centre.
Speed sensor
error