Whirlpool LSA 1100 Скачать руководство пользователя страница 11

Whirlpool  |  User Manual

11

Using your Washer

• 

Separate whites from colored 

clothes.

• 

Towels (Lint generators) should 

be washed separately.

•  

Do not stuff the clothes; drop 

them loosely and evenly for best 

results.

•  

ensure that the clothes are 

loaded well below the balance 

ring.

• 

ensure that small clothes are 

loaded in the middle of the basket for best  wash 

performance.

poWER oN tHE 

MACHINE

LoAd youR MACHINE

SELECt tHE pRoGRAM

StEp: 1

StEp: 2

StEp: 3

Press the on/off button to turn the 

washer ‘On’ or to manually turn 

it ‘Off’.

Select 

the 

appropriate 

program 

depending  on  the  type  of  cloth  to  be 

washed and how dirty they are.

Press the program button repeatedly to 

arrive at the desired program.

Do  check  the  ‘Using  your  Washer’ 

section  in  this  user  manual  for  special 

features.

AddING dEtERGENt 

ANd SoFtENER

StEp: 4

AddING dEtERGENt

•  Pull  out  the  detergent/softener  tray  gently  till  it 

stops.

•  Add  the  measured  and  correct  amount  of  the 

detergent based on the detergent manufacturer’s 

recommendations  (depending  on  load  size  and 

soil level) in to the detergent compartment.

•  in  case  of  using  tap  cold  water  wash,  mix  the 

measured  amount  of  detergent  with  warm  water

  (1 litre at approximately 40

o

C) and add this mixed 

detergent solution to the wash load.

•  in  case  of  low  water  inlet  pressure,  scatter 

the  detergent  evenly  on  the  basket  for  proper 

dispensing.

IMPORTANT:

•  Using  very  little  detergent  will  result  in  a  poor 

wash quality.

•  Using  too  much  detergent  will  produce 

excessive  suds  and  may  cause  the  washer  to 

slow/  stop.  excessive  suds  can  result  in  poor 

rinsing and detergent residue on clothes.

•  Check  for  the  instructions  on  the  detergent 

pack.

HELpFuL tIpS

•  less  detergent  can  be  visualized  through  the 

transparent lid with the absence of foam.

•  too  much  detergent  can  be  visualized  through 

transparent  lid  with  the  presence  of  excessive 

foam;  excessive  foam  is  not  an  indication  of 

good cleaning.

•  Using  tap  cold  water  for  wash  may  cause 

detergent clogging and clumping to clothes

Adding Softener

Pour  a  measured  amount  of  liquid  fabric 

• 

softener  into  the  softener  compartment  below 
the max level indicator.
Always follow softener manufacturer’s directions 

• 

for correct amount of fabric softener.
Close dispenser tray.

• 

IMpoRtANt:

Fabric Softener will be automatically dispensed 

• 

by the machine during operation.

do not overfill or dilute. overfilling dispenser will 

• 

cause  fabric  softener  to  immediately  dispense 
into washer.

if extra rinse option is selected, fabric softener 

• 

will be dispensed during the last rinse.
It is normal for a small amount of water to remain 

• 

in the dispenser at the end of a cycle.

HELpFuL tIpS:

See  “Washer  maintenance”  for  information  on 

• 

recommended  method  of  cleaning  detergent/

softener dispenser tray.

Содержание LSA 1100

























Отзывы: