15
USING YOUR WASHER
Fill
▼
Rinse
▼
Drain-No agitation
▼
Spin-Spray rinse
▼
Spin
▼
Off
U
NDERSTANDING WHAT HAPPENS IN EACH CYCLE
When the Cycle Control knob is set to a number and
pulled out, the washer fills (to the selected load size)
before agitation and timing start. The washer begins
agitating immediately after filling; agitation occurs
with the washer lid up or down.
During agitation, the XTRA ROLL ACTION
TM
agitator
(on some models)
creates a continuous
rollover action that
provides a thorough
cleaning of the wash
load.
After agitation starts, the Cycle Control knob turns
clockwise until it points to an OFF area and the
cycle ends.
NOTES:
•
The washer pauses briefly throughout each cycle.
These pauses are normal for washer operation.
•
On some models, a Gentle Wash system helps
protect your fabrics by reducing wash agitation
speed during the last few minutes of wash agitation
in the Normal and Permanent Press cycles.
Sequence of cycles
Fill
▼
Wash selected time
▼
Drain*
No agitation
▼
Spin
▼
WASH
RINSE
*
The Permanent Press cycle partially drains, fills, agitates
briefly, and drains.
