Whirlpool FSCR 10431, Инструкция по здоровью и безопасности, использованию, уходу и установке, Страница: 31 / 54

31
EN
1 .
Press and hold the Programme button to enter
into the settings mode .
2 .
Select WATER HARDNESS by turning and
pressing the knob .
3 .
Select the relevant water hardness level (soft,
medium or hard) by turning and pressing the knob .
4 .
Select EXIT to exit the settings mode by
turning and pressing the knob .
ADAPT THE WASHING MACHINE TO YOUR LO-
CAL WATER HARDNESS
The washing machine comes with preset water
hardness level soft . Check your regional water
hardness level, for example by consulting your
local authorities or via internet . – If your local water
hardness is not soft, adjust the washing machine as
follows:
1 .
Press and hold the Programme button
to enter into the settings mode .
2 .
Select DOSING AID by turning and pressing
the knob .
3 .
Select the detergent group for which you
want to save the dosing value; chose between:
• Coloured detergent
• Generic detergent
• Delicate detergent by turning and pressing the
knob .
4 .
Select and confirm the dosing value, which
you have identified before on the detergent pack,
by turning and pressing the knob .
5 .
Select EXIT to exit the settings mode by
turning and pressing the knob .
Do this procedure for all 3 programme groups .