28
If you experience
Possible Causes
Solution
Wash cycle not performing as expected (cont)
Cycle time changes or cycle time too
long (cont.)
• Excessive suds in washing machine.
• Load may be out of balance.
• When excessive suds are detected, a
special suds routine automatically starts
to remove extra suds and ensure proper
rinsing of your garments. This routine
will add time to the original cycle.
• When load unbalance occurs,
a washing process will start to
redistribute the load. This extends the
cycle time. Avoid washing single items.
Balance a single item such as a rug or
jeans jacket with a few extra items.
Unusual Noise
Rattling or vibrating noise
• A small object caught between the
edges of drum.
• Washing machine isn’t properly
leveled.
• Clothing is balled up in washing
machine.
• Check the front and rear edges of
the drum for small objects. Clean out
pockets before laundering.
• The washing machine may vibrate if
not properly installed. See Installation
Guides. All four washing machine feet
should be in firm contact with the floor.
• When balled up, the load will bounce,
causing the washing machine to
vibrate. Separate the load items and
restart the washing machine.
Error Code Appears in Display
F0E4
Over temperature on wash cycle
F0E5
Off balance load detected
F1E4
Main relay error
F3E1
Pressure sensor problem
F3E2
Wash temperature sensor failure
F3E4
ADS error – sensors
F5E1
Door lock problem
F5E2
Door lock will not lock
• Wash water is too hot. Washing machi-
Wash water is too hot. Washing machi-
ne may be connected incorrectly to the
home hot water supply.
Load could be unbalanced or too large.
•
Problem detected with the main relay.
•
Problem detected with the pressure
sensor.
• Problem detected with the wash tem-
Problem detected with the wash tem-
perature sensor.
•
Detergent level sensor error.
•
Problem detected with the door lock.
•
Problem detected with the door lock.
•
Make sure that the washing machine
is connected to the cold water supply
only.
•
Avoid tightly packing the washing
machine. Avoid washing single items.
Balance a single item with such as a rug
or jeans with a few extra items.
•
Try resetting the washing machine by
unplugging it from the outlet and then
plugging it back in. If unsuccessful, call
for service.
•
Try resetting the washing machine by
unplugging it from the outlet and then
plugging it back in. If unsuccessful, call
for service.
•
Call for service.
•
Clean the bulk detergent dispenser, or
add detergent manually until dispenser
is cleaned.
•
Try resetting the washing machine by
unplugging it from the outlet and then
plugging it back in. If unsuccessful, call
for service.
•
Try resetting the washing machine by
unplugging it from the outlet and then
plugging it back in. If unsuccessful, call
for service.
Содержание FRR12451
