Whirlpool FHT1200, Инструкция по здоровью и безопасности, использованию, уходу и установке

Страница: 13 / 36

11
EN
Press button
onc
e to set the temperature.
a) Temperature setting: press button and LED lights up. You can press “ “ button to set
the temperature on a range of 15
℃
to 35
℃
. Press “ “ button once to raise temperature
setting by 1
℃
, press “ “ button once to lower temperature setting by 1
℃
, hold the “ “
button to change the number rapidly.
b)
Previous temperature
setting
will not change when enter into setting
mode unless your
press “ “ button to reset the temperature, and press button to confirm the
changes .
c)
If you don’t set the temperature in 5 seconds or you press other button except “ “, the
display panel will exit the temperature setting and will show room temperature
immediately. When room temperature is -10
℃
or below, the panel shows “LO”; when
room temperature is
higher than
40
℃
, the panel shows “HI”. In a range of -10
℃
to
40
℃
, t he panel shows actual temperature.
Use Your 2 in 1 Fan Heater
Timer
d) When you set the timer within 1-12 hour(s), the timer function will start (not show
countdown number). After finished, the machine will stop and enter to Standby mode
automatically.
e) If the timer set to 0 hour, timer function off, the machine works at normal.
f ) When both set the timer function and the desired temperature, display panel will show
the timer and the room temperature respectively in every 30 seconds. If the timer is not
set, the panel only shows the room temperature.
Temperature Setting
For Heating Mode
d) If the room temperature is higher than the temperature setting, PTC heating elements
and mode indicator on the panel will stop automatically while fan will operate for another
10 seconds before it stops. When the room temperature is below the temperature setting
within 1
℃
, PTC heating elements restart and heating mode will show on the display
panel. The machine continues to work.