Whirlpool FHT1200, Инструкция по здоровью и безопасности, использованию, уходу и установке

Страница: 12 / 36

10
Use Your 2 in 1 Fan Heater
Heating Mode Selection
Fan Mode Selection
Timer
Auto Swing
Press button to set the mode, the mode is changed in sequence:
Low Power, High Power Heating Mode.
a) Low Heating Power: LED lights up.
b) High Heating Power: LED lights up.
Press button to set the mode, the mode is changed in sequence:
Low Power, High Power Fan Mode.
a) Low Fan Power: LED lights up.
b) High Fan Power: LED lights up.
Press button to set the “Timer” function.
a) Timer function: Press button and LED lights up. You can press “
“ button to set the
timer with a range of 0 to 12 hours. Press “ “ button once to raise time setting by 1 hour,
press “ “ button once to lower time setting by 1 hour, hold the “ “ button to change
the number rapidly.
b) Previous timer setting will not change when enter to setting mode unless you press “ “
button to reset the time, and press button to confirm the changes.
c) If you don’t set the time in 5 seconds or you press other buttons except “ “, the display
panel will exit the Timer function and will show room temperature immediately.
Press button to start/stop the “Swing” function.
a) On: Press button, LED light up.
b) Off: Press button again, LED off.
n Cauti o
CAUTION
: : If the room temperature is higher than the temperature setting, PTC heating
elements and mode indicator on the panel will stop automatically while fan will operate
for another 10 seconds before it stops. When the room temperature is below the
temperature setting 1
℃
, PTC heating elements restart and heating mode will show on the
display panel. The machine continues to work. This is not malfunction.