background image

9

 WASHER CARE

Cleaning Your Washer

Cleaning the exterior

Use a soft, damp cloth or sponge to wipe up any spills such as 
detergent or bleach. Occasionally wipe the outside of your 
washer to keep it looking new.

Cleaning the interior

Clean your washer interior by mixing 250 mL of chlorine bleach 
and 500 mL of detergent. Pour this into your washer and run it 
through a complete cycle using hot water. Repeat this process if 
necessary.

NOTE:

 Remove any hard water deposits using only cleaners 

labeled for washer use.

Cleaning the liquid fabric softener dispenser

Flush dispenser periodically with warm water, as shown. Remove 
the dispenser by grasping the top of the dispenser with both 
hands and squeezing and pushing upward with thumbs. Clean 
the dispenser by rinsing it under a water faucet. Replace it after 
cleaning.

NOTE:

 Some models are equipped with a liquid fabric softener 

dispenser. To avoid damage to the washer or clothing, do not 
wash clothes with the liquid fabric softener dispenser removed or 
add detergent or bleach to this dispenser; it is for liquid fabric 
softener only. 

Water Inlet Hoses

Replace inlet hoses after 5 years of use to reduce the risk of hose 
failure. Periodically inspect and replace inlet hoses if bulges, 
kinks, cuts, wear or leaks are found. 

When replacing your inlet hoses, mark the date of replacement 
on the label with a permanent marker. 

Vacation, Storage and Moving Care

Install and store your washer where it will not freeze. Because 
some water may stay in the hoses, freezing can damage your 
washer. If storing or moving your washer during freezing weather, 
winterize it.

Non-use or vacation care

Operate your washer only when you are at home. If you will be on 
vacation or not using your washer for an extended period of time, 
you should:

Unplug washer or disconnect power.

Turn off the water supply to the washer. This helps avoid 
accidental flooding (due to a water pressure surge) while you 
are away.

To winterize washer

1.

Shut off both water faucets.

2.

Disconnect and drain water inlet hoses.

3.

Put 1 L of R.V.-type antifreeze in the basket.

4.

Run washer on a drain and spin setting (see “Drain and Spin”) 
for about 30 seconds to mix the antifreeze and water.

5.

Unplug washer or disconnect power.

To use washer again

1.

Flush water pipes and hoses. Reconnect water inlet hoses. 
Turn on both water faucets.

2.

Plug in washer or reconnect power.

3.

Run the washer through a complete cycle with 250 mL of 
detergent to clean out antifreeze.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, 
fire, or electrical shock.

WARNING

Содержание Compact Washe

























Отзывы: